TRENDnet TE100-PCIA Data Sheet - Page 2

Mbps PCI Fast Ethernet Card with ACPI Support - pcie

Page 2 highlights

TE100-PCIA 10/100Mbps PCI Fast Ethernet Card with ACPI Support SPECIFICATIONS Standards: • IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-TX Data Bus Width: • 32-bit bus mastering PCI Data Transfer Rate: • 10/100Mbps (20/200Mbps in full-duplex mode) Protocol: • CSMA/CD Connectors: • 1 RJ-45 (10Mbps or 100Mbps) Diagnostic LED's: • LNK, FDX/COL, SPD100, and ACT Network Drivers: • Novell ODI, NDIS, SCO UNIX, MS LAN Manager, Windows NT/95/98/ME/2000/XP, Windows for Workgroups and Packet Driver Temperature: • Operating Temperature: 0° to 50° C ( 32° -122° F) • Storage Temperature: -25° to 70° C ( -13° to 158° F) Humidity: • Operating Humidity: 10 to 70% (non-condensing) • Storage Humidity: 10 to 90% (non-condensing) Certifications: • FCC Class B, CE NETWORKING SOLUTIONS PRODUCT INFORMATION TE100-PCIA 10/100Mbps Fast Ethernet Adapter for PCI TE100-PCIE Boot-ROM for Netware and Windows NT TE100-PCIWplus 10/100Mbps PCI Fast Ethernet Card (Realtec Chipset) To Order Please Call: 1-888-326-6061 ORDERING INFORMATION TRENDware International, Inc. 3135 Kashiwa Street Torrance, CA. 90505. USA Tel: 310-891-1100 R Fax: 310-891-1111 TRENDnet Web: www.TRENDNET.com TRENDware, USA Email: [email protected] TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit _h_tt_p_:/_/w_w__w_.T_R__E_N_D_N__E_T_.c_om. Copyright © TRENDware International, Inc. 2004. All Rights Reserved.

  • 1
  • 2

To Order Please Call:
1-888-326-6061
SPECIFICATIONS
NETWORKING SOLUTIONS
PRODUCT INFORMATION
TE100-PCIA
10/100Mbps Fast Ethernet Adapter for PCI
TE100-PCIE
Boot-ROM for Netware and Windows NT
TE100-PCIWplus
10/100Mbps PCI Fast Ethernet Card (Realtec
Chipset)
TE100-PCIA
10/100Mbps PCI Fast Ethernet Card with ACPI Support
TE100-PCIA
10/100Mbps PCI Fast Ethernet Card with ACPI Support
Standards:
IEEE 802.3 10Base-T, IEEE 802.3μ 100Base-TX
Data Bus Width:
32-bit bus mastering PCI
Data Transfer Rate:
10/100Mbps (20/200Mbps in full-duplex mode)
Protocol:
CSMA/CD
Connectors:
1 RJ-45 (10Mbps or 100Mbps)
Diagnostic LED’s:
LNK, FDX/COL, SPD100, and ACT
Network Drivers:
Novell ODI, NDIS, SCO UNIX, MS LAN Manager,
Windows NT/95/98/ME/2000/XP, Windows for Workgroups
and Packet Driver
Temperature:
Operating Temperature: 0° to 50° C ( 32° -122° F)
Storage Temperature: -25° to 70° C ( -13° to 158° F)
Humidity:
Operating Humidity: 10 to 70% (non-condensing)
Storage Humidity: 10 to 90% (non-condensing)
Certifications:
FCC Class B, CE
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice.
For the most recent product information please visit
____________________
©
Copyright TRENDware International, Inc. 2004.
All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
Web:
www.TRENDNET.com
ORDERING INFORMATION
TRENDnet
TRENDware, USA
R