TRENDnet TE100-PCIE Manual - Page 3

Introduction

Get TRENDnet TE100-PCIE PDF manuals and user guides View all TRENDnet TE100-PCIE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

INTRODUCTION Congratulations on your purchase of a PCI Fast Ethernet adapter. This adapter was designed and manufactured to give you years of trouble free and reliable service. PCI Ethernet Card The PCI Ethernet adapter is a high performance adapter compatible with version 2.0 of the PCI local bus specification and support Plug and Play (PnP) function, making it fully auto-configuration. The adapter supports full-duplex mode. Full duplex mode can be used to obtain throughput of up to 20/200Mbps when connecting through an Ethernet switching hub. It also uses the Bus Mastering features of the PCI bus to give high performance with a low CPU load. Bus mastering adapter and other peripherals allow greatly reduced CPU utilization ratios, resulting in lower latency and better overall performance. The Ethernet adapter includes a complete set of drivers for popular network operating systems. The optional BOOT ROM device allows the diskless workstation to be connected to the network. 1 Product Features Meets PCI Local Bus specification, Rev. 2.0 PCI 32-bit Bus Master architecture IEEE 802.3u Auto-Negotiation for automatic selection of data transmission speed. Easy migration; single RJ-45 port for both 10Base-T and 100Base-TX Support Full Duplex operation on both 10BaseT and 100Base-TX Support 100ohm STP/UTP cables using Category 3, 4 or 5 for 10Mbps mode and category 5 for 100Mbps mode LED indicators for installation verification and diagnostic purpose. State Description ACT/ Blinking whenever a packet is transmitted Activity or received Link- Lit when there is a good connection between the workstation and the port that is connected to 10Base-T. Link- Lit when there is a good connection 100 between the workstation and the port that is connected to 100Base-TX. 2

  • 1
  • 2
  • 3
  • 4
  • 5
INTRODUCTION
Congratulations
on your purchase of a PCI Fast
Ethernet adapter.
This adapter was designed and
manufactured to give you years of trouble free and
reliable service.
PCI Ethernet Card
The PCI Ethernet adapter is a high performance
adapter compatible with version 2.0 of the PCI local
bus specification and support Plug and Play (PnP)
function, making it fully auto-configuration.
The adapter supports full-duplex mode.
Full duplex
mode can be used to obtain throughput of up to
20/200Mbps when connecting through an Ethernet
switching hub.
It also uses the Bus Mastering
features of the PCI bus to give high performance
with a
low CPU load.
Bus mastering adapter and
other
peripherals
allow
greatly
reduced
CPU
utilization ratios, resulting in lower latency and
better overall performance.
The Ethernet adapter includes a complete set of
drivers for popular network operating systems.
The
optional BOOT ROM device allows the diskless
workstation to be connected to the network.
1
Product Features
z
Meets PCI Local Bus specification, Rev. 2.0
z
PCI 32-bit Bus Master architecture
z
IEEE 802.3u Auto-Negotiation for automatic
selection of data transmission speed.
z
Easy migration; single RJ-45 port for both
10Base-T and 100Base-TX
z
Support Full Duplex operation on both 10Base-
T and 100Base-TX
z
Support
100ohm
STP/UTP
cables
using
Category 3, 4 or 5 for 10Mbps mode and
category 5 for 100Mbps mode
z
LED indicators for installation verification and
diagnostic purpose.
State
Description
ACT/
Blinking whenever a packet is transmitted
Activity or received
Link
-
Lit when there is a good connection
between the workstation and the port that
is connected to 10Base-T.
Link-
Lit when there is a good connection
100
between the workstation and the port that
is connected to 100Base-TX.
2