TRENDnet TE100-PCIWplus Data Sheet - Page 1

TE100-PCIWplus 10/100Mbps Fast Ethernet PCI Adapter TRENDware's TE100-PCIW Plus is a Plug and Play (PnP) high performance 10/100Mbps Fast Ethernet PCI Adapter. The TE100-PCIW Plus utilizes the latest chipset technology and 32-bitwide bus mastering interface. And its Plug and play function makes it fully auto-configurable. This PCI adapter automatically senses and switches to either 10Mbps or 100Mbps (20 Mbps or 200Mbps in full-duplex mode) and has a dual speed connection to an Ethernet /Fast Ethernet network with a single connection over Unshielded/Shielded Twisted Pair cable (UTP/STP). The TE100PCIW Plus is backed by TRENDware's limited lifetime parts and labor warranty. FEATURES • Realtec RTL8139A based chipset • 10/100Mbps auto-sensing • Single RJ-45 connector (CAT 3,4,5 UTP cable for 10Mbps operation and CAT 5 UTP cable for 100Mbps operation) • 32 bit PCI Bus Master Mode • Plug and Play (PnP) • Supports half- and full-duplex operation • Compatible with all popular operating systems • 5-years warranty TREND SPEC'S Standards: Data Bus Width: Data Transfer Rate: Protocol: Connectors: Diagnostic LEDs: Network Drivers: Operating Temp.: Storage Temp.: Operating Humidity: Storage Humidity: Certifications: IEEE 802.3 10Base-T, IEEE 802.3 100Base-TX 32-bit bus mastering PCI 10/100Mbps (20/200Mbps in full-duplex mode) CSMA/CD 1 RJ-45 (10Mbps or 100Mbps speed) LNK (Green) Green light will light when a good link is established. 100 (Green) LED will light when a good 100Mbps connection is established. Green LED will be unlit when a good 10Mbps connection is detected. Novell ODI, NDIS, SCO UNIX, MS LAN Manager, Windows NT/95/98, Windows for Workgroups and Packet Driver 0° to 50° C ( 32° to 122°F) -20° to 80°C ( -4° to 176° F) 10 to 90% (non-condensing) 10 to 90% (non-condensing) FCC Class B, CE