TRENDnet TEW-210APB User's Guide

TRENDnet TEW-210APB Manual

Get TRENDnet TEW-210APB PDF manuals and user guides View all TRENDnet TEW-210APB manuals
Add to My Manuals
Save this manual to your list of manuals

TRENDnet TEW-210APB manual content summary:

  • TRENDnet TEW-210APB | User's Guide - Page 1
    TEW-210APB Wireless Multi-mode AP User Manual Version 1.7.4.5 - Apr 2002 1
  • TRENDnet TEW-210APB | User's Guide - Page 2
    4.2 How to change the IP Address 8 4.3 Managing Security 9 4.4 Advanced Setting 10 4.5 Access Control 12 4.6 Change community string 13 4.7 Reset device 14 5 Technical Specifications TEW-210APB.... 15 5.1 Standard Specifications 15 5.2 Environmental 15 5.3 Power Specifications 15 5.4 Radio
  • TRENDnet TEW-210APB | User's Guide - Page 3
    2. Introduction Thank you for purchasing our TEW-210APB Wireless LAN Access Point. This manual will assist you with the installation procedure. The package you have received should contain the following items: • User manual • TEW-210APB Access Point • Power adapter • SNMP utility CD Note: if
  • TRENDnet TEW-210APB | User's Guide - Page 4
    LED(ACT) will flash whenever there is traffic on the respective networks which is at least ten times per second for the wireless LAN because of so-called 'beacons'. You can reset the Access Point's settings to factory defaults by pushing a paperclip in the little hole next to the power connector. 4
  • TRENDnet TEW-210APB | User's Guide - Page 5
    4. SNMP Features You can make use of SNMP utility software for connect TEW-210APB which you want to manage. Supported features: • Restrict the authority of user to access WLAN and this unit. • Support IEEE 802.11 WEP encryption. • Optimizing the radio configuration via assign the independent
  • TRENDnet TEW-210APB | User's Guide - Page 6
    pc and TEW-210APB whether in a same subnet and the connection is well, you can do a test via " ping " command. For example, you can employ the following command " ping 192.168.5.100 " to check this connection is ok or not. After launched the SNMP Manager, Please click the " Find Access Point " which
  • TRENDnet TEW-210APB | User's Guide - Page 7
    4.1-2 When you got the available AP and press the connect button, there is a pop out window will come out. You should import the community string and assign a role for administration. The default community string is " public " and the Authority need to be a " Administrator ". Please refer to the
  • TRENDnet TEW-210APB | User's Guide - Page 8
    to change the IP Address If you wish to change the default IP address of TEW-210APB, please click the tab " Setup " " Bridge " " IP configuration " IP addresses for your Access Points is applying a DHCP server in your network. If you do and enable this setting, the Access Points will acquire an IP
  • TRENDnet TEW-210APB | User's Guide - Page 9
    waves do not stop at your office walls. Eavesdropping or unauthorized access from outside and your building can be a serious threat. If you wish to enable the Privacy Options function, please click the " Setup " " Wireless LAN " " Privacy Options " and choose the encryption method. The encryption
  • TRENDnet TEW-210APB | User's Guide - Page 10
    and parameters, it will show on the following table. You can assign the proper parameters to this unit for good performance. Figure 5 Access Point Name: The device name. ESSID: Extended Service Set Identifier (Wireless Network Identifier) is the group name that will be shared by every member of your
  • TRENDnet TEW-210APB | User's Guide - Page 11
    is only available if the WEP option is implemented. Shared Key authentication supports authentication of STAs as either a member of those who know a be selected. Access Point: This mode provides access for wireless stations to wired LANs and from wired LANs to wireless stations. Wireless Bridge:
  • TRENDnet TEW-210APB | User's Guide - Page 12
    802.11 standard allows for Access Control rules based on the client station's hardware address, and is fully implemented by the TEW-210APB. The Mac address table can be specified with a text file format. Then using the " Authorized Mac Address " which under the " Setup" " Wireless LAN " to import or
  • TRENDnet TEW-210APB | User's Guide - Page 13
    4.6 Change community string The default community string is "public". All of the setting can be changed only the import string is fit with system. There are two kind of authorities can connect to this unit. One is Administrator the other is general user. The community string can be changed by this
  • TRENDnet TEW-210APB | User's Guide - Page 14
    reset hole and the procedure can be done with the following steps. 1.You can reset the Access Point's settings to factory defaults by pushing a paperclip in the little hole next to the UTP port while the Access Point is on and do not release it right away. 2.Release the reset button when the " ACT
  • TRENDnet TEW-210APB | User's Guide - Page 15
    5 Technical specifications of TEW-210APB 5.1Standards supported − IEEE 802.11 standard for Wireless LAN − All major networking standards (including TCP/IP, NetBEUI, IPX) 5.2 Environmental − Operating temperature (ambient): − 0 ~ 55°C Humidity: − Max. 95% Non-condensing 5.3 Power Specifications −
  • TRENDnet TEW-210APB | User's Guide - Page 16
    Data encryption: − 40-bits WEP Encryption − 128-bits WEP Encryption Utility Software: − SNMP Manager to manage wireless LAN, network connection and client access control 5.6 Physical Dimensions - 103mm x 145mm x 30mm 16
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
TEW-210APB Wireless
Multi-mode AP
User Manual
Version 1.7.4.5
– Apr 2002
1