TRENDnet TEW-212APBO Quick Installation Guide - Page 6

Connect to the power source and the local network, P-LAN, LAN-IN - setup

Get TRENDnet TEW-212APBO PDF manuals and user guides View all TRENDnet TEW-212APBO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

TEW-212APBO Quick Installation Guide Connect to the power source and the local network Step 1 Connect the Ethernet cable from the TEW-212APBO router to the port on the POE (Power over Ethernet) host (PH-110 Power LAN 1 port hub) labeled P-LAN OUT. Step 2 Connect a straight-through Ethernet cable from the LAN-IN port of the POE host to a spare port on the hub or switch within the local network. The steps described above are summarized in the Figure 3.2. Figure 3.2: Connecting TEW-212APBO to the power source and to the network In the next section, we will discuss the procedure to setup a computer on the local network, so we can use it to configure the router. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
TEW-212APBO Quick Installation Guide
Connect to the power source and the local network
Step 1
Connect the Ethernet cable from the TEW-212APBO router to the port on the
POE (Power over Ethernet) host (PH-110 Power LAN 1 port hub) labeled
P-LAN
OUT
.
Step 2
Connect a straight-through Ethernet cable from the
LAN-IN
port of the POE
host to a spare port on the hub or switch within the local network.
The steps described above are summarized in the Figure 3.2.
Figure 3.2:
Connecting TEW-212APBO to the power source and to the network
In the next section, we will discuss the procedure to setup a computer on the local
network, so we can use it to configure the router.
6