TRENDnet TEW-228PI Manual - Page 11
Hardware Installation - wireless network adapter
View all TRENDnet TEW-228PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
HARDWARE INSTALLATION LED Indicator LNK/ACT (Link/Activity) The LNK indicator indicates green when the Wireless PCI Adapter is connected to a network successfully. Otherwise the LNK indicator blinks green and off three seconds continuously whiles the WLAN is scanning the wireless devices or transmitting data. Check the installation 1. Shut down the computer, unplugs its power cord, and remove the chassis cover. 2. Insert the contact edge of the WLAN PCI Adapter into the connector of any available PCI Bus Master expansion slot. Press the card firmly into the connector such that the card's contacts are fully seated in the PCI slot connector. 3. Install the bracket screw and secure the card to the computer chassis. 4. Cover the computer's chassis. 5. Switch computer power on. The computer will automatically activate the newly installed driver and utility the WLAN PCI Adapter 5