TRENDnet TEW-229UB Quick Installation Guide - Page 3
Con TCP/IP Network Protocol, Checking the Adapter's IP Address - wireless
View all TRENDnet TEW-229UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
TEW-229UB Quick Installation Guide ENGLISH Configure TCP/IP Network Protocol For Windows 2000/XP users: - On the Desktop, right click on My Network Places Æ select Properties Æ right click on the Wireless Network Connection Æ select Properties, the Wireless Network Connection Properties Window will appear - Under General tab, select Internet Protocol (TCP/IP) Æ click on Properties button, Internet Protocol (TCP/IP) Properties Window will appear i. For DHCP IP address Setup 1. Select Obtain an IP address automatically option 2. Select Obtain DNS server address automatically option 3. Click Ok to complete. ii. For Static IP address Setup 1. Select Use the following IP address option and enter the IP, Subnet Mask and Default gateway addresses. 2. Select Use the following DNS server address option and enter DNS addresses. 3. Click OK to complete For Windows 98/ME users: - On the Desktop, right click on Network Neighborhood Æ select Properties Æ right click on the Wireless Network Connection Æ select Properties, the Wireless Network Connection Properties Window will appear 5 TEW-229UB Quick Installation Guide ENGLISH - Under Configuration tab, select 802.11b Pen Size Wireless USB Adapter (TCP/IP protocol) Æ click on Properties button, TCP/IP Protocol Properties Window will appear i. For DHCP IP address Setup 1. Select Obtain an IP address automatically option ii. For Static IP address Setup 1. Select Specify an IP address option and enter the IP, Subnet Mask addresses. Note: If your network's "Wireless Access Point" or "Wireless Router" has DHCP Server feature, for ease of configuration, please enable it and setup the wireless adapter with DHCP IP configuration. After the wireless adapter connects to the Access Point or Router, it will receive the addresses automatically. Checking the Adapter's IP Address Windows 2000/XP: go to "start", select "run", type in cmd and click ok. At the command prompt (C:\), type in ipconfig/all and hit "Enter". Windows 98/ME: go to "Start", select "Run", type in winipcfg and click "OK". From the drop-down menu, select the name of the network adapter (not the PPP Adapter). Ping Command: If you know a networked device's IP address, in the command prompt (c:\), type in ping xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the device's IP address) and hit "Enter". If you see replies from this IP address, your computer should be able to communicate with this device. 6