TRENDnet TEW-411BRP User's Guide - Page 11

Important Notice - ip

Page 11 highlights

Period is 30 seconds (in other words, the Router will check the Internet connection every 30 seconds). LAN IP Address and Subnet Mask: This is the Router's IP Address and Subnet Mask as seen on the internal LAN. The default value is 192.168.1.1 for IP Address and 255.255.255.0 for Subnet Mask. Wireless: This section provide the Wireless Network settings for your WLAN SSID: The service set identifier ( SSID ) or network name. It is case sensitive and must not exceed 32 characters, which may be any keyboard character. You shall have selected the same SSID for all the APs that will be communicating with mobile wireless stations. Domain: The displaying information is related with each domain regulation. Channel: Select the appropriate channel from the list provided to correspond with your network settings. You shall assign a different channel for each AP to avoid signal interference. Security: There are 3 types of security to be selected. To secure your Wireless Networks, it's strongly recommended to enable this feature. WEP: Make sure that all wireless devices on your network are using the same encryption level and key. WEP keys must consist of the letters "A" through "F" and the numbers "0" through "9." Important Notice IUnseorr'dseGrutiodemake right use of WPA, please ensure that your current Wireless Adapter's driver, and10 Wireless Utility can support it, WPA needs 802.1x authentication (when RADIUS mode is chosen),

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

User’s Guide
10
Period is 30 seconds (in other words, the Router will check the Internet connection every
30 seconds).
LAN IP Address and Subnet Mask:
This is the Router'
s IP Address and Subnet Mask as seen on
the internal LAN. The default value is 192.168.1.1 for IP Address and 255.255.255.0 for Subnet Mask.
Wireless:
This section provide the Wireless Network settings for your WLAN
SSID:
The service set identifier ( SSID ) or network name. It is case sensitive and must not exceed 32
characters, which may be any keyboard character. You shall have selected the same SSID for all the
APs that will be communicating with mobile wireless stations.
Domain:
The displaying information is related with each domain regulation.
Channel:
Select the appropriate channel from the list provided to correspond with your network
settings. You shall assign a different channel for each AP to avoid signal interference.
Security:
There are 3 types of security to be selected. To secure your Wireless Networks, it’s strongly
recommended to enable this feature.
WEP:
Make sure that all wireless devices on your network are using the same encryption level and
key. WEP keys must consist of the letters "A" through "F" and the numbers "0" through "9."
Important Notice
In order to make right use of WPA, please ensure that your current Wireless Adapter’s driver, and
Wireless Utility can support it, WPA needs 802.1x authentication (when RADIUS mode is chosen),
though the Operating System must also support 802.1x protocol. For Microsoft’s OS family, only