TRENDnet TEW-450APB Quick Installation Guide - Page 5
Con the Access Point - default ip
 |
UPC - 710931502718
View all TRENDnet TEW-450APB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3. Configure the Access Point Note: It is recommended that you configure the Access Point from a wired computer. Before the Access Point can be configured, a Static IP address must be assigned ton your computer's network adapter in the subnet of 192.168.1.x. Since the Access Point's default IP address is 192.168.1.100, make sure no other network devices are assigned an IP address of 192.168.1.100. (Refer to the Troubleshooting section on how to configure TCP/IP settings on your PC) For a Wired Computer 1. Open your web browser, type http://192.168.1.100 in the Address bar, and press Enter. 2. Enter User name and Password, and then click OK. By default, User name: admin Password: admin 3. Click Wizard. 3 English
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
 |
 |
English
3
3. Configure the Access Point
Note: It is recommended that you configure the Access Point from a wired
computer.
Before the Access Point can be configured, a Static IP address
must be assigned ton your computer's network adapter in the subnet of
192.168.1.x.
Since the Access Point's default IP address is 192.168.1.100,
make sure no other network devices are assigned an IP address of
192.168.1.100.
(Refer to the Troubleshooting section on how to configure
TCP/IP settings on your PC)
For a Wired Computer
2.
Enter User name and Password,
and then click
OK
. By default,
User name:
admin
Password:
admin
1.
Open your web browser, type
in the
Address bar, and press
Enter
.
3.
Click
Wizard
.