TRENDnet TEW-452BRP User Guide - Page 23
Beacon Interval, RTS Threshold, Fragmentation Threshold, DTIM Interval, TX Rates MBps, 11g only mode - error
UPC - 710931502824
View all TRENDnet TEW-452BRP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3.2.3 Advanced This screen enables you to configure advanced wireless functions. Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The default beacon interval is 100. RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until data flow is normalized. Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error rates are high, choose values between 256 and 2432 until packet transfer rates are minimized. (NOTE: set this fragmentation threshold value may diminish system performance.) DTIM Interval: Type a DTIM (Delivery Traffic Indication Message) interval in the text box. You can specify a value between 1 and 65535. The default value is 3. TX Rates (MBps): Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the speed of wireless adapters connected to the WLAN. 11g only mode: enable or disable. Antenna Transmit Power: Adjust the power of the antenna transmission by selecting from the dropping list. 20