TRENDnet TEW-676APBO User's Guide - Page 9
Installation, Configuration, P+DATA Out, DATA IN, Enter
View all TRENDnet TEW-676APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TRENDnet User's Guide Installation 1. Unscrew the black cap covering the PoE port of the TEW-676APBO 2. Install the waterproof kit and insert one end of an Ethernet cable through the kit. TEW-676APBO 3. Connect the Ethernet cable to the PoE port of the TEW-676APBO 7. Connect the other end of the Ethernet cable to the LAN port of your network. 8. Plug the power cord into the injector. Then connect the plug into a power outlet. Configuration 1. Open a web browser, type the IP address of the Access Point and then press Enter. The default IP address is 192.168.10.100. 4. Tighten and secure the seal nut of the waterproof kit. 5. Connect the other end of the Ethernet cable to the P+DATA Out port on the PoE injector. 2. Enter the Username and Password and click OK. By default the Username: root and Password: root. 3. Click the Wizard button and follow the setup wizard instructions. Click Finish to complete installation. 6. Using another Ethernet cable, connect one end to the DATA IN port of the injector. © Copyright 2012TRENDnet. All Rights Reserved. 9