TRENDnet TEW-712BR User's Guide - Page 10
Hardware Installation, Green, Status Blinking Green, LAN 1
View all TRENDnet TEW-712BR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TRENDnet User's Guide Hardware Installation 1. Verify that you have an Internet connection when connecting your computer directly to your modem. TEW-712BR 2. Turn off your modem. 3. Disconnect the Network cable from your computer to your modem. 4. Using a Network cable, connect the WAN port on the router to your modem. 5. Using another Network cable, connect your computer to one of the four LAN ports on the router. 7. Turn on your modem. 8. Verify that the following front panel LED indicators on your router: Power (Solid Green), Status (Blinking Green), LAN 1, 2, 3, or 4 (Solid/Blinking Green for ports for which devices are connected), WAN (Solid/Blinking Green), and WLAN (Blinking Green). 6. Plug in the power adapter, connect it to the router's power port, and then push the On/Off Power Switch to the "On" position (pushed in). © Copyright 2012 TRENDnet. All Rights Reserved. 9