TRENDnet TEW-715APO User's Guide - Page 44
Coovachili, Upgrade Firmwre, Radius Shared Secret - firmware
View all TRENDnet TEW-715APO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
TRENDnet User's Guide Coovachili Management > Coovachili Settings Coovachilli is a captive portal management which allows WLAN users to easily and securely access the Internet. Under Router mode, when Coovachilli is enabled, the IEEE 802.11b/g/n Wireless Access Point will force an HTTP client on a network to see a special web page (usually for authentication purposes) before using the Internet normally. At that time the browser is redirected to a web page which may require authentication. Captive portals are used at most Wi-Fi hotspots. Therefore, to use Coovachilli, you need to find Coovachilli service providers that have the additional services needed to make Coovahcilli work. 1. Log into the management page (see "Access the management page" on page 9). 2. Click on Management, and click on CoovaChili Settings. 3. Select Coovachilli Enable to turn on feature. 4. Configure the settings below and click Apply to save settings. Radius Settings • Primary Radius Server: Enter the name or IP address of the primary radius server • Secondary Radius Server: Enter the name or IP address of the primary radius server if any. • Radius Auth Port: Enter the port number for authentication © Copyright 2012 TRENDnet. All Rights Reserved. TEW-715APO • Radius Acct Port: Enter the port number for billing • Radius Shared Secret: Enter the secret key of the radius server • Radius NAS ID: Enter the name of the radius server if any Radius Administrative-User • Radius Admin Username: Enter the username of the Radius Administrator • Radius Admin Password: Enter the password of the Radius Administrator Captive Portal • UAM Portal URL: Enter the address of the UAM portal server • UAM Secret: Enter the secret password between the redirect URL and the Hotspot. Upgrade Firmwre Management > Firmware Upload You may have added many customized settings to your router and in the case that you need to reset your router to default, all your customized settings would be lost and would require you to manually reconfigure all of your router settings instead of simply restoring from a backed up router configuration file. 1. Log into the management page (see "Access the management page" on page 9). 2. Click on Management, and click on Firmware Upload. 43