TRENDnet TEW-730APO Datasheet - Page 4

Specifications

Page 4 highlights

TEW-730APO Specifications Standards • IEEE 802.3 • IEEE 802.3u • IEEE 802.1d • IEEE 802.1p • IEEE 802.1Q • IEEE 802.1X • IEEE 802.11f • IEEE 802.11b • IEEE 802.11g • IEEE 802.11n (up to 300 Mbps) Hardware Interface • 1 x 10/100 Mbps (proprietary PoE) port** • Reset button • LED indicators • Grounding point Special Features • IP55 weather rated • 802.1Q VLAN assignment per SSID Access Control • Wireless encryption: WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS • Firewall (CPE Mode): NAT, Port Forwarding, DMZ Host • Access Controls: MAC, IP Filter, Port Filter, PerSSID client limiting • 802.1Q VLAN QoS • WMM • Traffic Shaping Operation Modes • Fat AP • Thin AP • Virtual AC • Virtual AC + Thin AP FAT AP Modes • Access Point (AP) • Client (Client + AP) • CPE (Client + Bridge) • WDS Bridge • WDS Repeater SSID • Up to 8 SSIDs Internet Connection Types (CPE mode) • Dynamic IP (DHCP) • Static IP (Fixed) • PPPoE (Dynamic IP) Management/Monitoring • Local/remote web based management (HTTP, HTTPS) • Local/remote CLI based management (Telnet, SSH) • SNMP v2/v3 • CPE Management • Upgrade firmware • Backup/restore configuration • Event logging • Syslog • Reboot • Restore to factory defaults • Ping test • Ping Watchdog • Trace Route • STP • STP forward delay • Traffic Shaping • MAC based access control Frequency • FCC: 2.412 - 2.462 GHz • ETSI: 2.412 - 2.472 GHz Wireless Channels • FCC: 1 - 11 • ETSI: 1 - 13 Modulation • 802.11b: DBPK, DQPSK, CCK with DSSS • 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM Antenna Gain • 9 dBi internal directional antenna Wireless Output Power/Receiving Sensitivity • 802.11b: FCC/ETSI: FCC: 24 dBm (max.), ETSI: 11 dBm (max.)/ -85 dBm (typical) @ 11 Mbps • 802.11g: FCC/ETSI: FCC: 22 dBm (max.), ETSI: 11 dBm (max.)/ -70 dBm (typical) @ 54 Mbps • 802.11n: FCC/ETSI: FCC: 20.5 dBm (max.), ETSI: 9 dBm (max.)/ -62 dBm (typical) @ 300 Mbps EIRP • FCC: up to 33 dBm (with built in 9 dBi antenna) • ETSI: up to 20 dBm (with built in 9 dBi antenna) Power • Input: 100 - 220 V, 50 - 60 Hz, 0.6 A • Output: 24 V / 1 A Consumption: 12 Watts Max. Operating Temperature • -20 - 70° C (-4 - 158° F) Operating Humidity • Max. 95 % non-condensing Certifications • CE • FCC Dimensions • 205 x 64 x 61 mm (8.1 x 2.5 x 2.4 in.) Weight • 0.8 kg (1.8 lbs.) Warranty • 3 year limited Package Contents • TEW-730APO • CD-ROM (User's Guide) • Quick Installation Guide • Poll mounting hardware • Proprietary PoE injector • Power adapter (24 V, 1 A) • Grounding wire * Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna align-ment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation. **Recommended max. PoE cable length of 70 m 20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [email protected] • www.TRENDnet.com TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved. Updated: 8/14/2015

  • 1
  • 2
  • 3
  • 4

Specifications
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.1d
• IEEE 802.1p
• IEEE 802.1Q
• IEEE 802.1X
• IEEE 802.11f
• IEEE 802.11b
• IEEE 802.11g
• IEEE 802.11n (up to 300 Mbps)
Hardware Interface
• 1 x 10/100 Mbps (proprietary PoE) port**
• Reset button
• LED indicators
• Grounding point
Special Features
• IP55 weather rated
• 802.1Q VLAN assignment per SSID
Access Control
• Wireless encryption: WEP, WPA/WPA2-PSK,
WPA/WPA2-RADIUS
• Firewall (CPE Mode): NAT, Port Forwarding, DMZ
Host
• Access Controls: MAC, IP Filter, Port Filter, Per-
SSID client limiting
• 802.1Q VLAN
QoS
• WMM
• Traffic Shaping
Operation Modes
• Fat AP
• Thin AP
• Virtual AC
• Virtual AC + Thin AP
FAT AP Modes
• Access Point (AP)
• Client (Client + AP)
• CPE (Client + Bridge)
• WDS Bridge
• WDS Repeater
SSID
• Up to 8 SSIDs
Internet Connection Types (CPE mode)
• Dynamic IP (DHCP)
• Static IP (Fixed)
• PPPoE (Dynamic IP)
Management/Monitoring
• Local/remote web based management (HTTP,
HTTPS)
• Local/remote CLI based management (Telnet,
SSH)
• SNMP v2/v3
• CPE Management
• Upgrade firmware
• Backup/restore configuration
• Event logging
• Syslog
• Reboot
• Restore to factory defaults
• Ping test
• Ping Watchdog
• Trace Route
• STP
• STP forward delay
• Traffic Shaping
• MAC based access control
Frequency
• FCC: 2.412 – 2.462 GHz
• ETSI: 2.412 – 2.472 GHz
Wireless Channels
• FCC: 1 – 11
• ETSI: 1 – 13
Modulation
• 802.11b: DBPK, DQPSK, CCK with DSSS
• 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with
OFDM
Antenna Gain
• 9 dBi internal directional antenna
Wireless Output Power/Receiving Sensitivity
• 802.11b: FCC/ETSI: FCC: 24 dBm (max.), ETSI:
11 dBm (max.)/ -85 dBm (typical) @ 11 Mbps
• 802.11g: FCC/ETSI: FCC: 22 dBm (max.), ETSI:
11 dBm (max.)/ -70 dBm (typical) @ 54 Mbps
• 802.11n: FCC/ETSI: FCC: 20.5 dBm (max.), ETSI:
9 dBm (max.)/ -62 dBm (typical) @ 300 Mbps
EIRP
• FCC: up to 33 dBm (with built in 9 dBi antenna)
• ETSI: up to 20 dBm (with built in 9 dBi antenna)
Power
• Input: 100 – 220 V, 50 – 60 Hz, 0.6 A
• Output: 24 V / 1 A Consumption: 12 Watts Max.
Operating Temperature
• -20 – 70° C (-4 – 158° F)
Operating Humidity
• Max. 95 % non-condensing
Certifications
• CE
• FCC
Dimensions
• 205 x 64 x 61 mm (8.1 x 2.5 x 2.4 in.)
Weight
• 0.8 kg (1.8 lbs.)
Warranty
• 3 year limited
Package Contents
• TEW-730APO
• CD-ROM (User’s Guide)
• Quick Installation Guide
• Poll mounting hardware
• Proprietary PoE injector
• Power adapter (24 V, 1 A)
• Grounding wire
* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna align-ment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather
conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.
**Recommended max. PoE cable length of 70 m
Updated: 8/14/2015
TEW-730APO
20675 Manhattan Place
Torrance
CA 90501
USA
T: 1-888-326-6061
F: 1-310-961-5511
www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.