TRENDnet TEW-730APO Quick Installation Guide - Page 2

1. Before You Start Package Contents Ÿ TEW-730APO Ÿ CD-ROM (User's Guide) Ÿ Quick Installation Guide Ÿ Mounting hardware Ÿ Power adapter (24V DC, 1A) Ÿ PoE injector Ÿ Grounding wire Minimum Requirements Ÿ Computer with an Ethernet port and Web Browser Ÿ Network switch or router with an available network port Ÿ 2 x network cables Note: The TEW-730APO does not support IEEE 802.3af. You must use the included proprietary Power over Ethernet (PoE) injector. 2. Configuring a WDS connection Note: Ÿ The default IP address of the TEW-730APO is 192.168.10.100. To configure the unit, your network adapter must have an IP address within the 192.168.10.XX range. (192.168.10.1 - 192.168.10.254) Please refer to the Appendix in the User's Guide for more information. Ÿ All antivirus and firewall software must be disabled before configuring the TEW-730APO. Ÿ The initial configuration should be done in a testing environment, with two TEW-730APO units approximately 15 ft. (5 meters) apart. Ÿ Configure and connect the devices before they are mounted. 1. Write the MAC address of the two TEW-730APOs. The MAC address can be found on the label on the back of the unit. TEW-730APO Product Description: 9 dBi Outdoor PoE Access Point IP Address: 192.168.10.100 Passwork: admin FCC ID Domain FCC MAC: XXX XXXXXXXXX H/W: 0.5 SN: 1523H21ANU000985 MADE IN CHINA 1