TRENDnet TEW-739APBO Quick Installation Guide - Page 10
Hardware Installation
 |
View all TRENDnet TEW-739APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3. Hardware Installation Waterproof kit installation 1. Unscrew the sealing nut from the main body. 2. Separate the rubber seal from the claw. 3. Verify that you have the following parts: Cable Gland, Seal, Claw, Sealing Nut 7. Insert the seal/rubber claw into the Cable Gland. Cable Gland Seal Claw Sealing Nut 4. Insert one end of an Ethernet cable into the sealing nut. 8. Connect the Ethernet cable to the PoE port on the rear of the access point. 5. Insert the Ethernet cable into the seal. 9. Using your hand, screw the main body counter clockwise to secure it to the TEW-739APBO. 6. Insert the seal into the claw. 10. Using your hand, screw the seal nut counter clockwise to secure it to the main body. 9
-
1 -
2
-
3
-
4
-
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16
-
17
-
18
 |
 |
9
3. Hardware Installation
Waterproof kit installation
1.
Unscrew the sealing nut from the main
body.
2.
Separate the rubber seal from the claw.
Cable Gland
Seal
Claw
Sealing Nut
3.
Verify that you have the following parts:
Cable Gland, Seal, Claw, Sealing Nut
4.
Insert one end of an Ethernet cable into
the sealing nut.
5.
Insert the Ethernet cable into the seal.
6.
Insert the seal into the claw.
7.
Insert the seal/rubber claw into the Cable
Gland.
8.
Connect the Ethernet cable to the PoE port
on the rear of the access point.
9.
Using your hand, screw the main body
counter clockwise to secure it to the
TEW-739APBO.
10.
Using your hand, screw the seal nut
counter clockwise to secure it to the main
body.