TRENDnet TEW-739APBO User's Guide - Page 8

Installation, P+DATA Out, DATA

Get TRENDnet TEW-739APBO PDF manuals and user guides View all TRENDnet TEW-739APBO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

TRENDnet User's Guide Installation 1. Unscrew the black cap covering the PoE port of the TEW-739APBO 2. Install the waterproof kit and insert one end of an Ethernet cable through the kit. TEW-739APBO 6. Using another Ethernet cable, connect one end to the DATA IN port of the injector. 3. Connect the Ethernet cable to the PoE port of the TEW-739APBO 7. Connect the other end of the Ethernet cable to the LAN port of your network. 8. Plug the power cord into the injector. Then connect the plug into a power outlet. 9. Connect and firmly screw your antenna to the N-Type connection port of the TEW- 739APBO located on the top panel. 4. Tighten and secure the seal nut of the waterproof kit. 5. Connect the other end of the Ethernet cable to the P+DATA Out port on the PoE injector. © Copyright 2014TRENDnet. All Rights Reserved. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
© Copyright 2014TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-739APBO
8
Installation
1.
Unscrew the black cap covering the PoE port of the TEW-739APBO
2.
Install the waterproof kit and insert one end of an Ethernet cable through the kit.
3.
Connect the Ethernet cable to the
PoE
port of the TEW-739APBO
4.
Tighten and secure the seal nut of the waterproof kit.
5.
Connect the other end of the Ethernet cable to the
P+DATA Out
port on the PoE
injector.
6.
Using another Ethernet cable, connect one end to the
DATA IN
port of the injector.
7.
Connect the other end of the Ethernet cable to the LAN port of your network.
8.
Plug the power cord into the injector. Then connect the plug into a power outlet.
9.
Connect and firmly screw your antenna to the N-Type connection port of the TEW-
739APBO located on the top panel.