TRENDnet TEW-740APBO2K Quick Installation Guide - Page 11
fasteners, insert the open end into the locking mechanism and pull tight until the access
View all TRENDnet TEW-740APBO2K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL 2. Reinstall the cover by lining up the guides into the notches as shown and push the cover down until the cover clips in and is secured. 3. Insert the included fasteners through the holes located at the back of the access point. 4. Wrap the fasteners around the pole where the access points will be installed. On the fasteners, insert the open end into the locking mechanism and pull tight until the access point is secured. 5. After the access points are properly mounted, you can connect the grounding wires to the proper ground points and RJ-45 cables from each access point to your network. 9 РORTUGUÊS
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
Р
ORTUGUÊS
9
2. Reinstall the cover by lining up the guides into the notches as shown and push the cover
down until the cover clips in and is secured.
3. Insert the included fasteners through the holes located at the back of the access point.
4. Wrap the fasteners around the pole where the access points will be installed. On the
fasteners, insert the open end into the locking mechanism and pull tight until the access
point is secured.
5. After the access points are properly mounted, you can connect the grounding wires to the
proper ground points and RJ-45 cables from each access point to your network.