TRENDnet TEW-812DRU Quick Installation Guide - Page 5

14. Select DHCP Connection (Dynamic IP Address). Then click Next. (Dynamic IP is typical for most ISP services. Verify service with your ISP.) Note: If you have a service other than Dynamic IP, refer to the User's Guide for installation instructions. 15. Click Apply. 16. Click Ok. 17. Open up your browser and enter in a website (e.g. www.trendnet.com) to verify that you have Internet connection. 18. For added security the TEW-812DRU's wireless network is pre-encrypted with its own unique network security key. You can find the unique security key and the pre-assigned network name (SSID) on a sticker on the front of the router and on the label on the bottom of the router. You will need this information to connect to the router. To change the network security key select Launch Wireless Security Setup Wizard under the Wizard tab. If the router is reset to factory defaults, the wireless encrption will reset to the network security key printed on the product label on the bottom of the router. Note: For instructions on using your USB device with the TEW-812DRU, please refer to the user's guide on the provided CD-ROM Wireless router installation is now complete. For detailed information regarding the TEW-812DRU's configuration and advanced settings, please refer to the User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com. Toll Free English Technical Support US/Canada: 855-373-4741 Hours: Monday-Friday 7:00 AM- 6:00 PM, Pacific Standard Time. After hours: 866-845-3673 4