TRENDnet TFC-15MS100 Quick Installation Guide - Page 4

2. Hardware Installation Installing two stand alone Fiber Converters 1. Connect the fiber cable to the fiber converters. This cable must be multi-mode for the TFC-110MM/ MST/MSC. This cable must be single-mode for the TFC-110S15/S30/S60/S100/ S20D3/S20D5/S40D3/S40D5. 2. Connect an RJ-45 Ethernet cable from the Ethernet port on the fiber converters to an Ethernet port on your switch (e.g TEG-424WS). 3. Connect the power adapter to the back of the fiber converter. Note: The TX and RX cables must be reverse on the opposite fiber connection. Note: The TFC-110S20D3 must be paired with the TFC-110S20D5. The TFC-110S40D3 must be paired with the TFC-110S40D5. Note: TFC-15MS100 converts Multi-Mode to Single-Mode fiber, it can be connected to a switch with Multi-Mode SC-type fiber connection (e.g TEG-S3000i with fiber modules) to extend the distance up to 15km with Single-Mode fiber. 2 English