TRENDnet TFM-560U User Guide - Page 9
Installing the Modem - usb
UPC - 710931301083
View all TRENDnet TFM-560U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing the Modem Follow these steps for a trouble-free start of your USB 2.0 Modem operations. 1. Turn the computer on. 2. Find an available USB 1.1/2.0 port of PC. 3. Plug the modem into the USB port carefully until the modem is properly seated. 4. Plug one end of telephone cord into the RJ11 jack at the modem's bracket. Plug another end of the telephone cord into the telephone wall jack 5. Up to now, the hardware installation had been finished. If you have successfully installed your Modem, please continue to next Chapter 3 Software Installation. If you encounter problems, please refer to Chapter 4 Troubleshooting section. NOTE: The telephone wall jack must use with an ANALOG phone line (the type found in most homes). Many offices are equipped with digital phone lines. Using different phone line might damage the unit. - 9 -