TRENDnet TK-204UK Quick Installation Guide - Page 6
Operation - 4 port
UPC - 710931304411
View all TRENDnet TK-204UK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Operation Note: To switch between computers, you can use the face-panel buttons of the KVM Switch, a hot-key command sequence via keyboard, or the Client Software Utility (Windows only). Push Buttons Press the push buttons to switch between computers. LED Indicators Green LED light: Computer 1 Blue LED light: Computer 2 Hot-Key Commands After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in "Hot-Key" mode. If you do not press a key within 2 seconds, the switch will exit hot-key mode. To switch between computers, press: User Definable Hot Key Command When using the below command, you must press on all the keys simultaneously. Y represents any symbol as defined in the KVM Utility program. By default, Y = 1 for port 1 and Y = 2 for port 2. For information on using the KVM Utility program, see section 4 Using the KVM Utility. 4 English