TRENDnet TK-205K User Guide - Page 6

4. Operation To switch between computers using hot-key commands. Hot-Key Commands A keyboard hot-key command consists of three keystrokes: Please see the next page for more detail. Hot-Key command = ScrLk + ScrLk + Command key(s) After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. If you do not press a key within 2 seconds, the switch will exit hot-key mode. Quick Reference Sheet for TK-205K Command Select PC Next lower PC channel Next higher PC channel Autoscan Hot-Keys 1 ScrLk + ScrLk + X (x is a top-row number key) x = 1 ~ 2 for PC channel number Description Select the active PC channel. ScrLk + ScrLk + Select the next lower connected (Arrow up) PC channel. ScrLk + ScrLk + Select the next higher connected (Arrow down) PC channel. ScrLk + ScrLk + S Autoscan through every channel for quick screen browsing of each channel. Stop Autoscan Press any key on keyboard Terminate Autoscan activity. NOTE 1. Note that x denotes a number key for the selected port number. (x = 1 or 2). Use only the number keys on the upper row of the keyboard. Hot-Key Convention: The hotkey notation ScrLk + ScrLk + (key) , denotes that you should hit the individual key consecutively one at a time, not simultaneously. 4 English