TRENDnet TPE-3018LS Datasheet - Page 4
Specifications
View all TRENDnet TPE-3018LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
TPE-3018LS SPECIFICATIONS Standards Management Access Control • IEEE 802.1d • HTTP / HTTPS web-based GUI - Standard or • 802.1X port-based authentication (Local user • IEEE 802.1p Surveillance Mode database, RADIUS, Guest VLAN) • IEEE 802.1Q • CLI command line interface (Telnet / SSHv2) • DHCP Snooping / Option 82 • IEEE 802.1s • SNMP v1, v2c, v3 • Loopback detection • IEEE 802.1w • IPv4/IPv6 support • Denial of Service (DoS) prevention • IEEE 802.1X • Multiple administrator or user accounts • Storm control (broadcast, unknown multicast, • IEEE 802.1ab • Dynamic/static unicast MAC address table unknown unicast, min: 16Kbps) • IEEE 802.3 • Enable or disable 802.3az power saving per port • Head-of-line (HoL) blocking prevention • IEEE 802.3u • Syslog • IP Source Guard / IP-MAC-Port-VLAN binding • IEEE 802.3x • System message logging severity levels • Protected ports • IEEE 802.3z • Port mirroring (transmit, receive, one-to-one, • Port Security/MAC address learning restriction • IEEE 802.3ab many-to-one) • Access Control List (ACL) • IEEE 802.3ad • ICMPv4/ICMPv6 • MAC Address (VLAN ID, EtherType, 802.1p) • IEEE 802.3af • Traceroute • IPv4 (IP Protocol, TCP/UDP Port, 802.1p, • IEEE 802.3at • LLDP DSCP, TCP flag, ICMP type, ICMP code) • IEEE 802.3az • Cable diagnostics test • Surveillance Mode (ONVIF) Device Interface • 16 x Gigabit PoE+ ports • 2 x Shared Gigabit ports (RJ-45 or SFP (100/ 1000Mbps)) • LED indicators • PoE power status LED display (total power budget, available power, consumption per port) Data Transfer Rate • SFP DDM (Digital-diagnostic-monitoring) • UDLD (UniDirectional Link Detection) • Port error disabled/Errdisable state • Ping watchdog MIB • RMON MIB RFC 1271 • IPV4 MIB RFC 1213 (read only) • SNMP MIB RFC 3415 • Surveillance mode GUI for simplified configuration and network monitoring • Device discovery for ONVIF compliant devices such as IP cameras or NVRs • Upload virtual maps • Change IP camera IP address settings • Upgrade IP camera firmware • Change IP camera administrator user name and password • Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) • Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) • Gigabit Ethernet: 2000Mbps (full duplex) Performance • Switch fabric: 36Gbps Spanning Tree • STP (spanning tree) • RSTP (rapid spanning tree) • MSTP (multiple spanning tree) Link Aggregation • Static link aggregation and dynamic LACP (Up to 8 groups) PoE • PoE budget: 220W • 802.3at: up to 30W per port (ports 1-16) • PoE Mode A: Pins 1,2 and pins 3,6 for power • PoE power scheduling • PD alive check • Over current/short circuit protection • RAM buffer: 512KB • MAC address table: 8K entries • Jumbo Frames: 10KB • Forwarding mode: store and forward • Forwarding rate: 26.7Mpps (64-byte packet size) VLAN • Multiple management VLAN assignment • 802.1Q Tagged VLAN • MAC-based VLAN • Surveillance VLAN • Voice VLAN • Up to 256 VLAN groups, ID Range 1-4094 Quality of Service (QoS) • 802.1p Class of Service (CoS) • DSCP (Differentiated Services Code Point) • Bandwidth limit per port • Queue Scheduling: strict priority (SP), weighted round robin (WRR) Multicast • IGMP Snooping v2/v3 • IGMP immediate/fast leave • IGMP querier • Dynamic/static multicast MAC address table • MVR (Multicast VLAN registration) Power • Input: 100 - 240V AC, 50 - 60Hz, internal power supply • Max. consumption: 14W (No PoE load) Surge Protection • 6kV (Ports 17 & 18) Fan/Acoustics • Quantity: 1 (Hot swappable) • Noise Level: 60.1 dBA (max.) • Up to 1K multicast entries