TRENDnet TU3-ETGH3 User's Guide - Page 7

TRENDnet User's Guide 7. The installation was successful, click Restart to restart your computer Now the installation is completed. You can connect the adapter to your USB 2.0/3.0 port then connect your network cable from the router to the adapter. The Link LED should light up green to indicate a proper physical connection between the adapter and the network. If the Link LED doesn't light up, please verify the cable connections between all the network devices. TU3‐ETGH3 Verifying the Driver Installations For Windows Once you finished the installation, you can open Windows Device Manager to verify if your Ethernet adapter is properly installed. To access the Device Manager: On Windows 7 / Windows® 8 / Windows 8.1 ®: Right‐click Computer on the desktop and click System Properties>Device Manager On Windows Vista: Right‐click Computer on the desktop and click Properties > Device Manager. On Windows XP: Right‐click My Computer on the desktop and click Properties > (Hardware) > Device Manager. In the Network adapters group, an item named ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter should be displayed. If there is a question or exclamation mark next to that item, then the driver is not properly installed. Please delete the item, select the Delete the driver software for this device option (if provided), unplug the adapter from your computer and then repeat the installation steps. © Copyright 2014 TRENDnet. All Rights Reserved. 6