TRENDnet TV-H500 Quick Installation Guide - Page 7

Installing External Antenna to Wireless IP Camera Note: 1. Before installation, you need the following products: TEW-ASAK, antenna cable (TEW-L406 or TEW-L412) and an external antenna (TEW-AO14D). 2. Since the TV-IP512W requires two surge arresters (TEW-ASAK), two antenna cables (TEW-L406 or TEW-L412) and two external antennas (TEW-AO14D), you will need to perform steps 3, 4, 5 and 8 for each surge arrester (TEW-ASAK). 1. Remove the antenna(s) from the back of your wireless IP camera. 2. Follow steps 1-4 in the Hardware installation section above. 3. Insert the IP Camera's power adapter and TEW-ASAK(s) through the mounting bracket. 4. Insert the TEW-ASAK(s) power adapter and the IP camera's power adapter through hole. 5 English