TRENDnet TV-IP201W Data Sheet - Page 2

Wireless Internet Camera Server with Audio TV-IP201W SPECIFICATIONS Image Sensor Sensor Resolution Lens Minimum Illumination Audio MIC Input Volume Control Compression Video/Image Image Frame Rate Compression Resolution / Light Frequency Frame Rate Setting Mirror Function Control Communication LAN Protocol Software Browser Application Supported OS System CPU RAM/Flash ROM OS NO & Control Input Output RS-485 Requirements Memory Size • ¼" Color CMOS Sensor • 640 x 480 pixel • f :6.0mm F1.8 Lens (CS-Mount Standard, Replaceable) • On: 2.5 Lux • Off: 2.5 Lux • Internal MIC (mono) • Adjustable • ADPCM/PCM • 30fps@CIF, QVGA, VGA • M-JPEG • 176 x 144, 320 x 240, 640 x 480 • Outdoor/Indoor/50Hz/60Hz • 1, 3, 7, 12, 15, 25, 30 (Depends on video format) • Vertical / Horizontal • Yes (Brightness/ Contrast/ Saturation/ Sharpness) • 10/100Mbps Auto-Sense, Auto-MDIX • HTTP, FTP, TCP/IP, UDP, ARP, ICMP, DHCP, PPPoE, DDNS, SMTP, UPnP • Internet Explorer (5.0 or above) or Netscape Navigator (6.0 or above) • IP View and Active X • Windows 98SE, ME, 2000, XP, Vista • RDC 1610 • 16MB/4MB • Linux • 1 set, 2 pin (photo relay; Active High: 9~40V DC; Dropout: 0V DC) • 1 set, 2 pin (photo relay. Close circuit current: 70mA~100mA; 30Ohm. Open circuit voltage: 240V AC or 350V DC) • Half Duplex (to control external pan/tilt device • 512MB or above • Intel Celeron 1.1GHz or above (Pentium 4 Recommend) VGA card resolution: 800 x 600 or above Note: According to Engineer, to record 8 Cameras at the same time, will require at least P4 3.0GHz, 1GB RAM. TV-IP201W rev:04.27.2009