TRENDnet TV-IP262PI Quick Installation Guide - Page 19

TRENDnet User's Guide Network >> Advanced  HTTPS Enable: Select this option to enable HTTPS, which is a secure protocol to provide authenticated and encrypted communication within your network. HTTPS Port: Assign a HTTPS port in the text box. The default HTTPS port is 443.  Bonjour: The devices with Bonjour will automatically broadcast their own services and listen for services being offered for the use of others. If your browser with Bonjour, you can find the camera on your local network without knowing its IP address. The Apple Safari is already with Bonjour. You can download the complete Bonjour for Internet Explorer browser from Apple's web site by visiting http://www.apple.com/bonjour/. © Copyright 2012 TRENDnet. All Rights Reserved. TV-IP262PI  RTSP RTSP Streaming: The camera supports three levels of RTSP access. The default RTSP Port is 554. Disable sic Digest RTSP link does not require authentication. No username/password required. RTSP link prompts for authentication. Username/password are transmitted in plain text. RTSP link prompts for authentication. Username/password are encrypted during data transmission. TRENDnet recommends using RSTP Digest authentication method. Disable and Basic methods pose security risks. Please verify if your RTSP client supports RSTP authentication method selected. Multicast settings: Configure the following settings so that you can deliver information from your camera to a set of receivers. Group IP Assign a category of IP addresses to receive the information from the camera. H.264 Port Assign a multicast port for H.264 in the text box. The default port is 1234. MPEG4 Port Assign a multicast port for MPEG4 in the text box. The default port is 1236. Audio Port TTL Assign a multicast port for audio in the text box. The default port is 1238. Set the TTL value from 1 to 255, which is used to modify the time to live field in the IP header.  QoS Live Video DSCP: Assign the DSCP (DiffServ Code Point) of the stream video from the camera. Live Audio DSCP: Assign the DSCP (DiffServ Code Point) of the stream audio from the camera. 18