TRENDnet TV-IP313PI Users Guide - Page 32
Read User Name
View all TRENDnet TV-IP313PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
TRENDnet User's Guide SNMP SNMP Settings allows you to assign the contact details, location, community name and trap settings of SNMP. This is a networking management protocol used to monitor network‐attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP compatible devices (called agents) return data stored in their Management Information Bases. TV‐IP313PI SNMP V1/V2 Enable SNMPv1: Enable SNMPv2c: Read SNMP Community: Write SNMP Community: Trap Address: Trap Port: Trap Community: Check this box to enable SNMP v1 management. Check this box to enable SNMP v2c management. Specify the password to access the SNMP community for read only access. Specify the password for access to the SNMP community with read/write access. Specify the IP address for the SNMP trap community. Specify the port number for the SNMP trap community. Specify the name of SNMP trap community. SNMP V3 Enable SNMPv3: Read User Name: Security Level: Check this box to enable SNMP v3 management. SNMP v3 member user name. Choose one of the security levels. © Copyright 2017 TRENDnet. All Rights Reserved. Authentication Algorithm: Authentication Password: Private‐key Algorithm: Private‐key Password: Write User Name: Security Level: Choose the authentication method to verify the source of information: MD5 or SHA. Specify the authentication password between 8 to 32 letters. Choose the privacy key to encrypt SNMP messages: DES or AES. Specify the privacy key between 8 to 32 letters. SNMP v3 manager user name. Choose one of the security levels. 32