TRENDnet TV-IP341PI Users Guide - Page 9

Hardware Installation

Get TRENDnet TV-IP341PI PDF manuals and user guides View all TRENDnet TV-IP341PI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

TRENDnet User's Guide TV-IP341PI • Temperature: TV‐IP341PI works within a specified temperature range. Areas with severe temperatures should be avoided when installing the camera. It's recommended that you use an enclosure with a heater and blower if you plan on using this camera outside of the specified temperature range. • Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image sensor. If sunlight is necessary for your viewing purposes, provide protection for the image sensor. • Lighting: Consider installing your camera faces the same direction of the light sources. Shooting images with top‐down position outdoor or next to the existing light source are good choices. Avoid the light source if it creates a shade that darkens the viewing area. Hardware Installation Disassemble 1. Loosen the three screws on the edge of the bubble with the screw driver. 2. Lift and put aside the bubble. 3. Remove the inner black liner. Black Liner Bubble Screws © Copyright 2016 TRENDnet. All Rights Reserved. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
TRENDnet User’s Guide
TV-IP341PI
© Copyright 2016 TRENDnet. All Rights Reserved.
9
•
Temperature:
TV
‐
IP341PI works within a specified temperature range.
Areas with severe temperatures should be avoided when installing the
camera. It’s recommended that you use an enclosure with a heater and
blower if you plan on using this camera outside of the specified
temperature range.
•
Sunlight:
Avoid direct sun light exposure. Direct sun light will damage
the image sensor. If sunlight is necessary for your viewing purposes,
provide protection for the image sensor.
•
Lighting:
Consider installing your camera faces the same direction of
the light sources. Shooting images with top
‐
down position outdoor or
next to the existing light source are good choices. Avoid the light source
if it creates a shade that darkens the viewing area.
Hardware Installation
Disassemble
1.
Loosen the three screws on the edge of the bubble with the screw driver.
2.
Lift and put aside the bubble.
3.
Remove the inner black liner.
Black Liner
Bubble
Screws