TRENDnet TV-IP344PI Quick Installation Guide - Page 11

Mounting the camera Note: For tips on capturing appropriate camera viewing angle, please refer to the user's guide. 1. Loosen the locking bolts and manually position the camera as desired . 2. Place the provided template label on the wall or ceiling. Drill hole Wire hole Drill hole Drill hole 3. Drill holes for the provided screw anchors at each marked position on the template. Make sure the drill bit matches the size of the provided screw anchors. 4. If the camera wire will be installed through the base plate of the unit, skip to step 6. If the wiring will be routed through the wall, drill a hole for the cable. 5. Pass the camera's cables through the hole. 6. Connect the network cable to the camera. Ensure the camera is not powered. 7. Insert the provided screw anchors into the pilot holes. 9