TRENDnet TV-IP430PI Quick Installation Guide - Page 3
Hardware Installation and Configuration
 |
View all TRENDnet TV-IP430PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
2. Hardware Installation and Configuration Note: To download the latest version of the Setup Wizard, please go to http://www.trendnet.com/support and select the TV-IP430PI from the products downloads page dropdown menu. 1. Do not install or mount the camera until you complete the installation steps below. Next to your computer, temporarily place the IP camera in the provided protective foam insert with the dome facing up. 2. Connect a network cable from your computer to a LAN port on your network. 3. Insert the included CD-ROM into your computer. 4. Select language from the drop down menu. 5. Select Install Camera. 6. Write down the MAC address of your camera. Then click Next. 2
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
2
2. Hardware Installation and Configuration
1.
Do not install or mount the camera until you complete the installation steps below. Next to your
computer, temporarily place the IP camera in the provided protective foam insert with the dome
facing up.
2.
Connect a network cable from your computer to a LAN port on your network.
3.
Insert the included CD-ROM into your computer.
4.
Select language from the drop down menu.
5.
Select
Install Camera
.
6.
Write down the MAC address of your camera. Then click
Next
.
Note
: To download the latest version of the Setup Wizard, please go to
http://www.trendnet.com/support and select the TV-IP430PI from the products downloads page
dropdown menu.