TRENDnet TV-IP430PI User's Guide - Page 5

TRENDnet User's Guide ONVIF ONVIF compliant Complimentary Software Complimentary pro-grade software to manage up to 32 TRENDnet cameras Complimentary Apps Live video to a mobile device with free iOS and Android™ apps Cables Connectors for AC power adapter (Not required when PoE injector is included) Audio Line in, line out, and grounding wires Network cable connection BLUE/WHITE RED/WHITE GREEN/WHITE AUDIO_OUT AUDIO_IN AUDIO_GND BLYAERCLEKLDOW/GREEN AC24V AC24V TV-IP430PI Warnings:  It is recommended to use the PoE+ injector or an IEEE 802.3at compliant PoE+ switch.  If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. Disassembling the product will void the warranty and may cause harm or injury.  The installation should be done by a qualified service person and should conform to all construction and electric regulations and other local codes. Cautions:  Make sure the power supply voltage is correct before using the camera.  Do not drop the camera or subject to physical shock.  Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the sensor from dirt.  Do not aim the camera lens at the strong light such as the Sun or an incandescent lamp. Strong light can damage the camera sensor.  The sensor may be burned out by a laser beam. When any laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam.  Do not place the camera in extremely hot, cold temperatures (the operating temperature should be between -30°C to 65°C), dusty or damp environment, and do not expose it to high electromagnetic radiation.  To avoid heat accumulation, good ventilation is required for a proper operating environment.  While shipping, the camera should be packed in its original packing.  Use water proof tape to cover all the wires, cables which will be exposed outdoor after the camera installation. © Copyright 2015 TRENDnet. All Rights Reserved. 3