Tanaka ECV-4501 Owner's Manual - Page 18
Maintenance schedule, Daily maintenance, Weekly maintenance, Monthly maintenance
View all Tanaka ECV-4501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ECV-4501 Owner's Manual Maintenance schedule Below you will find some general maintenance instructions. For further information please contact your service dealer. Daily maintenance • Clean the exterior of the unit. • Clean the chain oil filter port. • Clean the groove and oil filter port in the guide bar • Clean the side case of saw dust. • Check that the saw chain is sharp. • Check that the bar nuts are sufficiently tightened. • Make sure that the chain transport guard is undamaged and that it can be securely fitted. • Check that nuts and screws are sufficiently tightened. Weekly maintenance • Check the starter, especially cord and return spring. • Clean the exterior of the spark plug, • Remove the spark plug and check the electrode gap. Adjust it to 0.6 mm (.024'), or change the spark plug. • Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged. • Clean the air filter. Monthly maintenance • Rinse the fuel tank with gasoline, and clean fuel filter. • Clean chain oil filter. • Clean the exterior of the carburetor and the space around it. • Clean the muffler of carbon. www.tanakapowerequipment.com 17 [email protected]