Tanaka TED-270PFDH Owner's Manual - Page 10
Pfdls/270pfhs Fig. 2-6b
View all Tanaka TED-270PFDH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
TED-270 Fig. 2-6 Fig. 2-6B Fig. 2-7 Fig. 2-7B 34/0 /. Fig. 2-7C /. 34/0 Fig. 2-8 TED-270PFL/270PFLS/ 270PFDH/270PFDLS Fig. 2-8B To tighten the chuck more securely, set a 19mm spanner (1) between gear case and drill chuck to lock drive shaft. Turn on lock lever (2) then hit the mounted chuck handle with a hammer to screw in (clockwise) the chuck. (TED-270PFL/ 270PFLS/270PFDH/270PFDLS/270PFHS) (Fig. 2-6) To loosen the chuck, set the spanner on the other side and hit the chuck handle from this side to screw out (counterclockwise), the chuck with the lock lever on.(TED-270PFL/270PFLS/270PFDH/ 270PFDLS/270PFHS) (Fig. 2-6B) Note! use chuck mount wrench (3) in place of chuck handle and tighten or untighten manually instead of hitting. Do not hit the chuck mount wrench. (Fig. 2-7, 7B) To install or loosen the keyless chuck, set a 19mm spanner (1) between gear case and chuck to lock drive shaft. Install the locking bar (2) in the tool bag into the chuck, and then tighten(clockwise) the bar (2) with the enclosed box spanner or loosen (counter-clockwise) . (Fig.2-7C) Stopping (Fig. 2-8, 8B) Decrease engine speed, and push ignition switch to stop position. GB-9