Thermador CEM304NS Installation Instructions - Page 9
Electrical Installation
View all Thermador CEM304NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Electrical Installation Electrical Requirements You can find the identification plate with the electrical specifications on the underside of the appliance. The junctionbox must be located within 3 feet of the cooktop connection. It should be easily accessible for service purposes. PP )LWWLQJ&RQGXLWPP PP $SSUR[LPDWH -ER[ &RQGXLWDSSUR[ IHHWaPP Power supply Model CEM304NS CET304NS CEM365NS CET365NS CET366NS 240 V AC, 60 Hz system: circuit breaker 40 Amp 30 Amp 50 Amp 50 Amp 50 Amp 208 V AC, 60 Hz system: circuit breaker 30 Amp 30 Amp 40 Amp 40 Amp 40 Amp Connect Electrical Supply 9 WARNING Before installing, turn off at the service panel. Lock service panel to prevent power from being turned on accidentally. The electrical power supply system should be a 1-phase, 3-wire system with ground connection. Install suitable junction box (not furnished). An appropriately-sized, ULlisted conduit connector must be used to correctly attach the conduit to the junction box. The branch-circuit breakers ampacity, the wire sizes and the connections must be conform to the requirements of the National Electrical Code or Canadian Electrical Code and all local codes and ordinances. Attach flexible conduit to the junction box. 9 WARNING To reduce the risk of electric shock and fire, do not use a flexible power supply cord. Connect the cooktop lead wires to the junction box supply wires in proper phase: black (L1) to black red (L2) to red blank copper wire to ground Check the Installation 9 CAUTION Before you plug in an electrical cord or turn on power supply, make sure all controls are in the OFF position. Remove everything from the cooktop surface including stickers. Clean cooktop surface with cooktop cleaning creme. Switch on the circuit breaker. Verify that elements function properly. 9