Thermador CES366FS Design Guide - Electric Cooktops - Page 10

COOKTOPS - eLeCTrIC INSTALLATION OPTIONS INSTALLATION ABOVE A WALL OVEN OR WARMING DRAWER Thermador Masterpiece® Electric Cooktops may be installed above a Thermador Single Built-in Oven as long as there is no contact between the bottom of the cooktop and the top of the oven. Thermador Masterpiece Electric Cooktops may also be installed above a Thermador Warming Drawer to create a convenient cooking center. Refer to the warming drawer section for additional specifications. IMPORTANT We strongly recommend the installation of a Thermador Ventilation System with all Masterpiece Electric Cooktops. Seal the surfaces of the cutout to make them heat resistant. This prevents the surfaces from expanding as a result of humidity. Solid surface countertops require a special cutout and installation. For example, heat reflective tape or rounded corners may be necessary. Contact the countertop manufacturer for instructions specific to your countertop. WARNING To reduce the risk of ignition of nearby combustible materials, install the countertop with a minimum distance of 2" (51mm) from both side walls and the back wall. INSTALLATION ABOVE A THERMADOR BUILT-IN OVEN 415/16" (125 mm) 3 15/16" 4 3/16" (100mm) (106 mm) 6 3/4" (172 mm) Fitting / Conduit 36" (914 mm) COOKTOP SUMP 1/4" 113/16" (7mm) (47mm) OVEN 281/4" (718mm) 24 7/16" (621mm) 271/16" (687 mm) COUNTERTOP 3 "(76mm) 29 1/16" (738 mm) COOKTOPS 36-INCh eLeCTrIC models: Cem365FS, CeT366FS 36-INCH ELECTRIC COOKTOP AND CUTOUT DIMENSIONS COUNTERTOP REQUIREMENTS 43/4" (121mm) TOE KICK Note: Dimensions based on standard countertop height (36" with 43/4" toe kick including base plate). The built-in oven can be installed below the electric cooktop as long as there is no contact between the bottom of the cooktop and the top of the oven. 1.800.735.4328 | THERMADOR.COM 129