Thermador CIT36XWB Installation Instructions - Page 6

Prepare Installation Space PrepaInstlaionSpace Create the cut-out in the countertop according to the installation diagram. The angle of the cut surface to the countertop must be 90°. The lateral cut-out edges must be flat in order to ensure that the retaining springs are positioned properly on the appliance. With multi-layered countertops, secure strips laterally in the cut-out if necessary. After creating cut-out, remove shavings. Seal cut surfaces in a heat- and water-resistant manner. Observe minimum distance between device underside and cabinet surfaces of 3/8" (10 mm). Cutout dimensions for 30" cooktops Model: CIT30XWBB PLQ PLQ  PLQ  Cutout dimensions for 36" cooktops Model: CIT36XWB, CIT36XWBB PLQ PLQ  PLQ  ¡  [ PLQ ƒ PLQ ¡  [ PLQ ƒ PLQ   PP   PP Ventilation To assure that the appliance works correctly, the cooktop MUST be sufficiently ventilated. Since the ventilation in the lower section of the appliance requires a sufficient supply of fresh air, the cabinet must be designed accordingly. The following is required for this: ▯ A minimum clearance between the rear of the cabinet and the kitchen wall, and between the surface of the worktop and the upper area of the drawer. PLQ PLQ   PP 6