Thermador DWHD440MFM User Manual - Page 12
Dishwasher Cycles and Options - 02
View all Thermador DWHD440MFM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Setting the amount of rinse aid The amount of rinse aid dispensed can be set from "r:00" to "r:06". To change the setting: 1 Press the [On/Off] button. 2 Hold down the "A" button (see page 13) and press [Start] until the display indicates "d:00". Release both buttons. 3 Press the "A" button until the display shows "r:05". 4 Press the "C" button to select the desired setting. r:00 = dispenser is OFF r:04 = medium/high setting r:01 = lowest setting r:05 = high setting r:02 = low setting r:06 = highest setting r:03 = medium setting 5 Press [Start] to save the setting. Dishwasher Cycles and Options Wash Cycles Pots & Pans: Best for cleaning items with baked-on food or grease. These dishes would normally require soaking. Auto: With our most complex soil sensing capability, this cycle is perfect for use with mixed loads of dishware and varying amounts of food soil. This is the most flexible cycle and is a good choice for everyday use. Normal: Thoroughly cleans a full load of normally soiled dishes. Note: The Energy Guide Label was based on this soil sensing cycle with all available options turned off. As prescribed in the energy test procedure, the unit was tested without any Rinse Aid in the Rinse Aid dispenser. A single dose of detergent was used in the Detergent Dispenser, with no detergent used in the prewash. The test was conducted with the upper rack in the highest position. Quick: Cleans lightly soiled dishes and reduces overall wash time. Wash Cycle Options Delay Start: Allows you to delay the start time of your dishwasher up to 24 hours. Half Load: The Half Load option can reduce the energy and water consumption when washing small, lightly soiled loads that fill approximately half of the dishwasher's capacity. To activate select the wash cycle, select the Half Load option and press Start. PowerBoost®: Combines powerful water pressure with increased water temperature to deliver the ultimate in heavy duty washing performance throughout the dishwasher. PowerBoost is available in the Pots & Pans, Auto and Normal cycles. To activate, select the "PowerBoost" button in addition to any of the three cycles listed above. Extra Dry: Used in combination with a wash cycle, the Extra Dry option raises the temperature and extends the drying time to further enhance drying results. Note: The dishwasher automatically defaults to Auto when turned off and back on. If you used the Extra Dry option in your last cycle, the dishwasher will default to Auto Wash with the Extra Dry option selected when you turn it on. 11