Home » Thermador Manuals » Ovens » Thermador ME302WS » Manual Viewer

Thermador ME302WS Instructions for Use - Page 32

Information on Data Protection, Wi-Fi, Module

Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Notes ▯ You can continue to use your oven as usual while updates are downloading. ▯ Depending on your personal settings in the app, software updates can also be set to download automatically. ▯ We recommend that you install security updates as soon as possible. Information on Data Protection When your appliance is connected to a WLAN network that is connected to the Internet for the first time, your appliance transmits the following categories of data to the Home Connect server (initial registration): ▯ Unique appliance identification (consisting of appliance codes as well as the MAC address of the installed Wi-Fi communication module). ▯ Security certificate of the Wi-Fi communication module (to ensure a secure data connection). ▯ The current software and hardware version of your appliance. ▯ Status of any previous resetting to factory settings. This initial registration prepares the Home Connect functions for use and is only required when you want to use these Home Connect functions for the first time. Note: Ensure that the Home Connect functions can be used only in conjunction with the Home Connect app. Information on data protection can be accessed in the Home Connect app. Wi-Fi® Module FCC/IC Statements Model: COM2 FCC ID: 2AHES-COM2 IC: 21152-COM2 The Home Connect module is a communication device designed to provide communication between appliances and smart devices. This module is integrated at the factory, under direct control of BSH Home Appliances Corporation, and is not user servicable or upgradable. At least 77/8 inch (20 cm) separation distance should be maintained from device to user. FCC COMPLIANCE STATEMENT 9 CAUTION Changes or modifications not expressly approved could void your authority to use this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. INDUSTRY CANADA STATEMENT This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems. 32

Section	Page
Table of Contents Use and care manual	3
9 Safety DefinitionsSafety Definitions	4
9 WARNING	4
9 CAUTION	4
NOTICE:	4
Note:	4
IMPORTANT SAFETY INSTRUCTIONS	5
READ AND SAVE THESE INSTRUCTIONS	5
WARNING	5
Proper Installation and Maintenance	5
WARNING	5
WARNING	5
WARNING	5
WARNING	5
Fire Safety	5
WARNING	5
WARNING	5
WARNING	6
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:	6
a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.	6
b. NEVER PICK UP A FLAMING PAN – You may be burned.	6
c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.	6
d. Use an extinguisher ONLY if:	6
Burn Prevention	6
CAUTION	6
Child Safety	6
WARNING	6
Cleaning Safety	6
WARNING	7
Risk of injury	7
WARNING	7
Risk of electrical shock	7
Cookware Safety	7
WARNING	7
Risk of electric shock	7
Warming Drawer Safety	7
CAUTION	7
WARNING	7
CAUTION	7
Notes	7
Proposition 65 Warning:	7
Causes of Damage	8
NOTICES	8
Protecting the Environment	8
Saving Energy	8
Accessories	9
9 CAUTION	9
Accessories Included	9
Note:	9
Special Accessories (not included)	9
Getting to Know the Appliance	10
Note:	10
Oven Overview	10
Oven Cavities	10
Oven Bottom	10
9 WARNING	10
NOTICE:	10
9 WARNING	10
Oven Cavity Features	11
Oven Vent	11
Cooling Fan	11
Convection Fan	11
Oven Light	11
Control Panel	11
Operating Controls	11
Touch Buttons	11
Full Touch Color Display	12
Basic way of operating the display:	12
In some instances you have further options to navigate through the menu:	12
Main Menu	12
Heating Modes Menu	13
Heating Modes Menu Conventional Oven	13
--------	14
Pan Placement	14
2 Cakes, Rack Level 4	14
Multiple Rack Baking for Cakes	14
4 Cakes, Rack Placement 3 and 5	14
Aluminum Foil	14
9 WARNING	14
Preheating the Oven	14
Preheat Reminders	14
For Best Results	14
Baking Pans and Dishes	15
Condensation	15
Before First Use	15
Before Using the Appliance for the First Time	15
Initial Use	15
Setting the time of day	15
1. Touch the bottom line.	15
2. Touch the “Hours” touch field and swipe to the left or right to select the current hour.	15
3. Touch the \	15
4. Touch the 8 symbol to apply the settings.	15
Setting the language	15
1. Touch the bottom line.	15
2. Swipe to the left or right to select the required language.	15
3. Touch the top line.	15
Setting the Clock Display	15
1. Touch \	15
2. Touch the bottom line.	15
3. Swipe to the left or right to select “digital” or “analogue”.	15
4. Touch the top line.	15
Setting up Home Connect	16
1. Touch “Home Connect”.	16
2. Touch “Start assistant”.	16
3. Follow the instructions in the chapter “Home Connect”.~ \	16
Note:	16
Notes	16
Cleaning the Accessories	16
Adjust Basic Settings	16
Changing the Settings	16
1. Touch the ON l OFF touch button.	16
2. Touch the MENU touch button.	16
3. Swipe to the left or right to select \	16
4. Touch “Continue”.	16
5. Swipe to the left or right to select the desired setting.	16
6. Touch the bottom touch field.	16
7. Swipe to the left or right to select the desired setting.	16
8. Touch the 8 icon (where applicable) to apply the setting.	16
9. Touch the MENU touch button.	16
10. Touch \	16
Available Settings	16
General Operation	17
High Altitude Baking	17
Switching the Appliance On and Off	17
Notes	17
Timer Options	17
Displaying and hiding timer options	17
Note:	17
Oven Timer	17
1. Touch the ON l OFF touch button.	17
2. Set the heating mode and temperature.	17
3. Touch the TIMERS touch button.	17
4. Touch the “+ Oven Timer” touch field.	17
5. Touch the required field and swipe to the left or right to set the oven timer.	17
6. Touch the 8 symbol.	17
7. Touch the START l STOP touch button.	17
Note:	17
Kitchen Timer	18
1. Touch the TIMERS touch button.	18
2. Swipe to the left or right to select the timer value. You can set hours, minutes and seconds.	18
3. Touch the 8 icon.	18
Note:	18
Delayed Operation - \	18
Notes	18
9 CAUTION	18
1. Place the food onto the appropriate accessory in the oven cavity and close the appliance door.	18
2. Touch the ON l OFF touch button.	18
3. Set the heating mode.	18
4. Touch the TIMERS touch button. The timer options are shown in the display.	18
5. Select Oven Timer and set a cook time. Touch the 8 icon.	18
6. Select TIMERS again and set End Time. Touch the 8 icon.	18
7. Touch the START l STOP touch button.	18
Checking, changing or deleting settings	18
1. Touch the TIMERS touch button.	18
2. Touch the required timer option.	18
3. Swipe to the left or right on the touch display to change the settings.	18
Setting a Heating Mode	18
1. Touch the ON l OFF touch button to switch on the appliance.	18
2. For double ovens, touch the symbol for the oven cavity you want to use:	18
3. Swipe to the left in the top line of the display to select “True Convection” ‚.	18
4. Swipe to the left or right in the bottom line of the display to select the temperature.	18
5. Touch the START l STOP touch button to start the appliance operation.	18
Note:	19
Default Values	19
Preheating Bar	19
INFO Touch Button	19
Sounds	19
Changing or Cancelling the Appliance Operation	19
Note:	19
Changing the appliance operation	19
1. Use the START l STOP touch button to stop the operation.	19
2. Touch the area for the setting that should be changed.	19
3. Swipe to the left or right to change the setting.	19
4. Use the START l STOP touch button to start the changed operation.	19
Notes	19
Cancelling the appliance operation	19
Note:	19
Fast Preheat	19
Notes	19
Activating the \	20
1. Set a heating mode and temperature.	20
2. Touch the START l STOP touch button to start the heating mode.	20
3. Touch the FAST PREHEAT touch button to activate the function.	20
4. Once the set temperature has been reached, the \	20
Panel Lock	20
Activating and Deactivating	20
1. Touch and hold the LOCK touch button (or the TIMERS touch button if LOCK is not present) until \	20
2. Touch and hold the LOCK touch button (or the TIMERS touch button if LOCK is not present) until \	20
Note:	20
Auto Convection Conversion	20
To turn on this feature:	20
1. Go to Settings	20
2. Press the ON\|OFF touch button to turn the oven on.	20
3. Press the MENU touch button.	20
4. Scroll over to Settings on the touch screen.	20
5. Select Conv. Conversion and press ON.	20
6. Exit Settings and select “Save” to save your settings.	20
Temperature Offset	20
Note:	20
Note:	20
Meat Probe	20
Suitable Heating Modes	20
Notes	20
Inserting the Meat Probe into the Food	20
NOTICE:	21
Setting and Starting Appliance Operation	21
9 WARNING	21
Risk of burns	21
9 WARNING	21
Risk of electric shock	21
Notes	21
1. Insert the meat probe into the socket on the left-hand side of the oven cavity.	21
Note:	21
2. Close the appliance door.	21
NOTICE:	21
3. Touch the ON l OFF touch button.	21
4. Set the heating mode.	21
Note:	21
5. Touch the oven cavity temperature on the left in the bottom line.	21
6. Swipe to the left or right to select the required oven cavity temperature.	21
7. Touch the 8 symbol to apply the setting.	21
8. Touch the ¥ core temperature on the right in the bottom line.	21
9. Swipe to the left or right to select the required core temperature.	21
10. Touch the START l STOP touch button.	21
Changing or Stopping the Appliance Operation	22
1. Touch the oven cavity temperature or meat probe temperature.	22
2. Swipe to the left or right to change the temperature.	22
3. Touch the 8 symbol to apply the setting.	22
1. Use the ON l OFF touch button to switch off the appliance.	22
2. Using an oven glove, unplug the meat probe from the socket.	22
Core Temperatures of Different Foods	22
Sabbath Mode	22
Note:	22
Note:	22
Starting	22
1. Touch the ON l OFF touch button.	22
2. Swipe to the left or right to select \	22
3. Touch the temperature in the bottom line.	22
4. Swipe to the left or the right to select the required temperature.	22
5. Touch the 8 icon to apply the setting.	22
6. Touch the cooking time + in the bottom line.	22
7. Swipe to the left or the right to select the required duration.	22
8. Touch the 8 symbol to apply the setting.	22
9. Touch the START l STOP touch button.	22
Notes	22
Cancelling	22
Yom Tov Mode	22
Note:	22
Note:	22
Starting	22
1. Touch the ON l OFF touch button.	22
2. Swipe to the left or right to select \	22
3. Touch the temperature in the bottom touch field.	22
4. Swipe to the left or the right to select the required temperature.	22
5. Touch the 8 icon to apply the setting.	22
6. Touch the cooking time + in the bottom touch field.	22
7. Swipe to the left or the right to select the required duration.	22
8. Touch the 8 icon to apply the setting.	22
9. Touch the START l STOP touch button.	22
Notes	23
Cancelling	23
Rack Positions	23
Inserting Racks	23
9 CAUTION	23
Flat Rack	23
1. Grasp rack firmly on both sides.	23
2. Insert rack (see picture).	23
3. Tilt rack up to allow stop into rack guide.	23
4. Bring rack to a horizontal position and push the rest of the way in.	23
1. Grasp rack firmly on both sides and pull rack toward you.	23
2. When the stop is reached, tilt rack up and pull the rest of the way out.	23
Telescopic Rack	23
1. Hold the rack at a slight angle.	23
2. Engage the rear hooks in the accessory brackets.	23
3. Hold the rack straight to allow second tab to rest over rack guide.	23
4. Push the rack in until it is even with the front hooks.	24
5. Lift the rack up to lock the last hook into place.	24
6. Push the rack in completely.	24
7. Engage the rack’s front hooks in the accessory brackets.	24
9 CAUTION	24
Rotisserie	24
Note:	24
Assembling the Rotisserie:	24
1. Insert the rotisserie rack half way into the oven on rack position 5.	24
2. Slide the left fork into the skewer and tighten the screw.	24
3. Slide meat or poultry for roasting onto the skewer and tighten the screw.	24
4. Slide the right fork onto the skewer and tighten the screw.	24
5. Check the balance of the food on the skewer by rolling the skewer in the palms of your hands. Food that is not evenly balanced on the skewer will not cook evenly.	24
6. Place the rotisserie skewer onto the rack.	24
7. Place the skewer rack into the oven and insert the drive shaft into the opening on the back oven wall.	24
8. If necessary, turn the rotisserie skewer slightly so that the drive shaft fits properly into the opening.	25
9. Insert flat rack on position 1 and insert broil pan to catch drippings.	25
Trussing Poultry for the Rotisserie	25
1. Slip one of the forks on the skewer with the tines pointing to the tip of the skewer. Loosely tighten the screw to keep it from slipping.	25
2. Insert the skewer through the poultry securing with the fork.	25
3. Cut 24\	25
4. Wrap each end of the string around each of the wings; catch each wing tip as the string is brought tightly together at the top and knotted. Do not cut off the extra string.	25
5. Cut another 24\	25
6. Pull legs forward; cross them on top of the skewer, bring string around and tie a knot.	25
7. Connect the string holding the legs to the string holding the wings; then knot. Add the other fork and push tines into the drumsticks to secure.	25
8. Check the balance by rolling the skewer in your palms. Poultry should not rotate or be loose in any way. If so, redo the trussing. The poultry will not cook evenly if it is not balanced on the skewer.	25
Start	25
Cooking Chart for Rotisserie	26
Warming Drawer Operation	26
9 CAUTION	26
Setting the Warming Drawer	26
1. Press the DRAWER touch button.	26
2. Touch the bottom line and swipe to the left or right to select the desired intensity.	26
3. Touch the 8 icon.	26
1. Press the DRAWER touch button.	26
2. Swipe right and select “off”.	26
3. Touch the 8 icon.	26
Warming Empty Serving Bowls and Plates	27
Warming Drawer Charts	27
Remove Drawer Insert	27
Note:	27
1. Open the drawer fully.	27
2. Grasp the overhanging flange of the insert about midway on each side of the drawer and lift it for approx. 2\	27
3. While holding the insert up rotate the front of the insert upward to clear the front inside of the drawer.	27
4. Once the insert has been removed it can be located to a more suitable location for cleaning using methods outlined in the chapter on Cleaning in this manual.	28
5. With the insert removed, the drawer base can be cleaned if necessary. Special care must be taken to prevent any damage to the now exposed heating element below the drawer insert. It is also not recommended to remove any more housing panels at this...	28
9 WARNING	28
risk of burns	28
Home Connect®	29
Notes	29
Setting Up	29
Connecting Your Oven to Home Connect	29
1. Install the Home Connect app.	29
2. Connect your oven to the Wi-Fi network.	29
3. Connect your oven to the app.	29
1. Install the Home Connect app.	29
2. Connect your oven to the Wi-Fi network.	29
Manual Registration in the Home Network	29
Note:	29
1. Touch the MENU touch button.	29
2. Swipe to the left or right to select \	29
3. Swipe to the left or right to select \	29
4. Touch “Start assistant”.	29
5. Touch “Start connecting”.	29
6. Use the \	29
7. Wait until \	29
8. The appliance is ready to connect to the app.	30
9. Follow the instructions of the app on your mobile device for manual network registration.	30
WPS Registration in the Home Network	30
Notes	30
1. Touch the MENU touch button.	30
2. Swipe to the left or right to select “Settings”.	30
3. Swipe to the left or right to select “Home Connect”.	30
4. Touch “Start assistant”.	30
5. Touch “Start connecting”.	30
6. Touch “Connect via WPS”.	30
7. Within 2 minutes press the WPS button on the router. Wait until “Network connection successful” is shown in the display.	30
8. The appliance is ready to connect to the app.	30
9. Follow the instructions of the app on your mobile device for automatic network registration.	30
Remote Start	30
9 WARNING	30
Notes	30
1. Touch the MENU touch button.	30
2. Touch “Remote start”.	30
Home Connect Settings	30
Note:	30
Wi-Fi	30
1. Touch the MENU touch button.	30
2. Swipe to the left or right to select \	30
3. Swipe to the left or right to select \	30
4. Touch “Open settings”.	30
5. Swipe to the left or right to select \	30
6. Touch the bottom line to select “On” or “Off”.	31
7. Touch the ; field to return to the Home Connect settings menu.	31
Disconnecting from the Network	31
Note:	31
1. Touch the MENU touch button.	31
2. Swipe to the left or right to select \	31
3. Swipe to the left or right to select \	31
4. Touch “Open settings”.	31
5. Swipe to the left or right to select \	31
6. Touch “Disconnect from network”.	31
7. Confirm by touching “Disconnect”.	31
Note:	31
Connecting to the NetworkConnecting to the network	31
1. Touch the MENU touch button.	31
2. Swipe to the left or right to select \	31
3. Swipe to the left or right to select \	31
4. Touch “Open settings”.	31
5. Swipe to the left or right to select \	31
6. Touch “Start assistant”.	31
7. Follow the instructions in the section entitled “Manual registration in the home network” or “Automatic registration in the home network”.	31
Connect to App	31
Note:	31
1. Touch the MENU touch button.	31
2. Swipe to the left or right to select \	31
3. Swipe to the left or right to select \	31
4. Touch “Open settings”.	31
5. Swipe to the left or right to select \	31
6. Touch the bottom line to select “Start”.	31
Remote control	31
Notes	31
1. Touch the MENU touch button.	31
2. Swipe to the left or right to select \	31
3. Swipe to the left or right to select \	31
4. Touch “Open settings”.	31
5. Swipe to the left or right to select \	31
6. Touch the bottom line to select “On” or “Off”.	31
7. Touch the ; field to return to the Home Connect settings menu.	31
Software Update	31
Notes	32
Information on Data Protection	32
Note:	32
Wi-Fi® Module	32
FCC COMPLIANCE STATEMENT	32
9 CAUTION	32
1. This device may not cause harmful interference, and	32
2. This device must accept any interference received, including interference that may cause undesired operation.	32
INDUSTRY CANADA STATEMENT	32
1. This device may not cause interference, and	32
2. This device must accept any interference, including interference that may cause undesired operation of the device.	32
Cleaning Your Oven	33
Suitable Cleaning Agents	33
NOTICE:	33
Tip:	33
9 WARNING	33
Risk of burns	33
Cleaning Guide	33
Notes	34
Surfaces in the Oven Cavity	34
Cleaning Enamel Surfaces	34
Note:	34
Keeping the Appliance Clean	34
Easy Clean	34
9 WARNING	34
Risk of scalding	34
Setting	34
1. Leave rack 3 and remove all other racks and accessories from the oven cavity.	34
2. Mix 2 cups water and 1/2 cup vinegar and place in broil pan tray on rack 3.	34
3. Touch the ON l OFF touch button.	34
4. Touch the MENU touch button.	34
5. Swipe to the left or right to select \	34
6. Touch the bottom line.	34
7. Touch the START l STOP touch button.	34
Exit	34
Subsequent Cleaning	34
1. Open the appliance door and remove the remaining water with an absorbent sponge cloth.	34
2. Clean the smooth surfaces in the oven cavity with a dish cloth or a soft brush. Stubborn residues can be removed using a soft scouring pad.	34
3. Remove limescale with a cloth soaked in vinegar. Then wipe with clean water and rub dry with a soft cloth.	34
4. Use the ON l OFF touch button to switch off the appliance.	34
5. Leave the appliance door ajar in the stop position (approx. 30°) for approx. one hour to allow the enamel surfaces in the oven cavity to dry thoroughly.	35
Removing Heavy Food Deposits	35
Self Clean	35
9 WARNING	35
When using the Self Clean feature	35
NOTICE:	35
Preparing the pyrolytic self-cleaning feature	35
9 CAUTION	35
Setting	35
1. Remove the accessories from the oven cavity.	35
2. Touch the ON l OFF touch button.	35
3. Touch the MENU touch button.	35
4. Swipe to the left or right to select \	35
5. Select a cleaning intensity.	35
6. Touch “Continue”.	35
7. Confirm that you have removed heavy soil and accessories from the oven cavity.	35
8. Touch the START l STOP touch button.	35
Note:	35
When Self Clean is Completed	35
Avoid These Cleaners	35
Service	36
9 WARNING	36
Risk of electric shock	36
9 WARNING	36
Risk of electric shock	36
Troubleshooting Chart	36
--------	37
Oven Light	37
1. Turn off power to the oven at the main power supply (fuse or breaker box).	37
2. Remove three screws from oven cavity holding the rack in place.	37
3. Remove oven rack to provide access to the bulb housing.	37
4. Remove screw from top of bulb housing.	37
5. Insert the tip of a narrow flat blade screwdriver between the metal clips at about a 40° angle. The screwdriver blade must be able to pass between the metal clips to reach the inner catch.	37
6. Push the screwdriver blade inward to disengage the catch from the slot in the bulb housing. Gently pry the lens off by moving the screwdriver handle away from the oven wall.	38
7. Support the glass lens cover to prevent it from falling.The lens should detach easily. Do not attempt to force it.	38
8. Pull the halogen bulb from its socket.	38
9. Replace the halogen bulb. Grasp the new bulb with a clean, dry cloth. Align the bulb prongs with the socket holes and press into place.	38
Note:	38
10. Put the glass cover back on by inserting it into the mounting clip and pressing the end nearest you into the housing until it locks into place. Insert screw through glass cover and tighten.	38
11. Reinstall the oven rack.	38
12. Turn power back on at the main power supply (fuse or breaker box).	38
Product Rating Label	38
How to Obtain Service or Parts	39
STATEMENT OF LIMITED PRODUCT WARRANTY	39
What this Warranty Covers & Who it Applies to	39
How Long the Warranty Lasts	39
Repair/Replace as Your Exclusive Remedy	39
Out of Warranty Product	40
Warranty Exclusions	40
Obtaining Warranty Service:	40
THERMADOR® Support	41
Service	41
Parts and Accessories	41
Table des Matières Notice d’utilisation	42
9 Définitions de sécuritéDéfinitions de sécurité	43

Match case Limit results 1 per page

Notes

▯

You can continue to use your oven as usual while

updates are downloading.

▯

Depending on your personal settings in the app,

software updates can also be set to download

automatically.

▯

We recommend that you install security updates as

soon as possible.

Information on Data Protection

When your appliance is connected to a WLAN network

that is connected to the Internet for the first time, your

appliance transmits the following categories of data to

the Home Connect server (initial registration):

▯

Unique appliance identification (consisting of

appliance codes as well as the MAC address of the

installed Wi-Fi communication module).

▯

Security certificate of the Wi-Fi communication module

(to ensure a secure data connection).

▯

The current software and hardware version of your

appliance.

▯

Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use these Home Connect functions for the first time.

Note:

Ensure that the Home Connect functions can be

used only in conjunction with the Home Connect app.

Information on data protection can be accessed in the

Home Connect app.

Wi-Fi

Module

FCC/IC Statements

Model: COM2

FCC ID: 2AHES-COM2

IC: 21152-COM2

The Home Connect module is a communication device

designed to provide communication between appliances

and smart devices.

This module is integrated at the factory, under direct

control of BSH Home Appliances Corporation, and is not

user servicable or upgradable. At least 7

inch (20 cm)

separation distance should be maintained from device to

user.

FCC COMPLIANCE STATEMENT

CAUTION

Changes or modifications not expressly approved

could void your authority to use this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received,

including interference that may cause undesired

operation.

INDUSTRY CANADA STATEMENT

This device complies with Industry Canada license-

exempt RSS standard(s).

Operation is subject to the following two conditions:

This device may not cause interference, and

This device must accept any interference, including

interference that may cause undesired operation of the

device.

Operation in the band 5150-5250 MHz is only for indoor

use to reduce the potential for harmful interference to co-

channel mobile satellite systems.