Thermador MEDMCW31JS Installation Instructions - Page 5
Dimensions for 27, Wall-Mounted Units - double oven
View all Thermador MEDMCW31JS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Dimensions for 27" Wall-Mounted Units Single Oven 27" Double Oven 27" 27 1/16" (687mm) It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4" space between the side of the oven and the wall/door. For oven support, install 2x4's extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be installed either above or below the unit. If the conduit box is installed below the unit, a 2" diameter hole or space is required between the back wall and the right rear of the 2x4 supports. The cabinet base must be flat and capable of supporting a weight of at least 193 lbs (87 kg). It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4" space between the side of the oven and the wall/door. For oven support, install 2x4's extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be located above the unit to facilitate connecting and servicing. The cabinet base must be flat and capable of supporting a weight of at least 361 lbs (164 kg). English 3