Thermador MEDS301WS Instruction manual - Page 37

Running the Drying Function for the Oven Cavity

Get Thermador MEDS301WS PDF manuals and user guides View all Thermador MEDS301WS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Once the Cleaning Function has Ended Once the oven cavity has cooled down, wipe down the oven cavity with a damp cloth if necessary. Note: During operation and while the cleaning function is active, reddish patches may form on the surfaces. This is not rust, but food residues. These patches are not hazardous to your health and do not limit the cleaning capacity of the self-cleaning surfaces. Easy Clean The Easy Clean function makes it easier to clean the oven floor. Food and food spills are soaked beforehand by vaporizing the vinegar solution. It can then be removed more easily. 9 WARNING RISK OF SCALDING Hot steam can arise due to water in the hot oven cavity. Never pour water into the hot oven cavity. Setting The "Easy Clean š" function can only be started once the oven cavity is cold (room temperature) and the appliance door is closed. Do not open the appliance door during this operation. Doing this will interrupt the "Easy Clean š" function. 1. Remove the accessories and racks from the oven cavity. 2. Touch the ON l OFF touch button. 3. Touch the MENU touch button. 4. Swipe to the left or right to select "Easy Clean š". 5. Touch the bottom line. 6. Touch the START l STOP touch button. The appliance starts the Easy Clean function. The remaining time appears on the display. Exit As soon as the cleaning function has run through, a signal sounds and the appliance ends the operation automatically. As soon as you open the appliance door, the interior lighting is switched on so that you can rinse the oven cavity more easily. The remaining water in the oven cavity must be removed promptly. Do not leave the remaining water in the oven cavity for a long time (e.g. overnight). The appliance must not be operated when the oven cavity is still wet or damp. Subsequent Cleaning 1. Open the appliance door and remove the remaining water with an absorbent sponge cloth. 2. Clean the smooth surfaces in the oven cavity with a dish cloth or a soft brush. Stubborn residues can be removed using a soft scouring pad. 3. Remove limescale with a cloth soaked in vinegar. Then wipe with clean water and rub dry with a soft cloth (including under the door seal). 4. Use the ON l OFF touch button to switch off the appliance. 5. Leave the appliance door ajar in the stop position (approx. 30°) for approx. one hour to allow the enamel surfaces in the oven cavity to dry thoroughly. Alternatively, you can also run the Drying function for the oven cavity. Running the Drying Function for the Oven Cavity 1. Touch the ON l OFF touch button. 2. Touch the MENU touch button. 3. Swipe to the left or right to select "Drying ª". 4. Touch the bottom line. 5. Touch the START l STOP touch button. The appliance starts Drying. The remaining time appears on the display. As soon as the Drying function has run through, a signal sounds and the appliance ends the operation automatically. Removing Heavy Food Deposits You have several options for removing particularly stubborn food deposits. ▯ Leave the vinegar solution to work for some time before starting Easy Clean. ▯ Rub vinegar solution onto the food and food spills on the smooth surfaces before starting Easy Clean. ▯ Repeat the Easy Clean function after the oven cavity has cooled down. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
37
Once the Cleaning Function has Ended
Once the oven cavity has cooled down, wipe down the
oven cavity with a damp cloth if necessary.
Note:
During operation and while the cleaning function
is active, reddish patches may form on the surfaces. This
is not rust, but food residues. These patches are not
hazardous to your health and do not limit the cleaning
capacity of the self-cleaning surfaces.
Easy Clean
The Easy Clean function makes it easier to clean the
oven floor. Food and food spills are soaked beforehand
by vaporizing the vinegar solution. It can then be
removed more easily.
9
WARNING
RISK OF SCALDING
Hot steam can arise due to water in the hot oven
cavity. Never pour water into the hot oven cavity.
Setting
The "Easy Clean
š
" function can only be started once
the oven cavity is cold (room temperature) and the
appliance door is closed.
Do not open the appliance door during this operation.
Doing this will interrupt the "Easy Clean
š
" function.
1.
Remove the accessories and racks from the oven
cavity.
2.
Touch the ON l OFF touch button.
3.
Touch the MENU touch button.
4.
Swipe to the left or right to select "Easy Clean
š
".
5.
Touch the bottom line.
6.
Touch the START l STOP touch button.
The appliance starts the Easy Clean function. The
remaining time appears on the display.
Exit
As soon as the cleaning function has run through, a
signal sounds and the appliance ends the operation
automatically.
As soon as you open the appliance door, the interior
lighting is switched on so that you can rinse the oven
cavity more easily. The remaining water in the oven cavity
must be removed promptly. Do not leave the remaining
water in the oven cavity for a long time (e.g. overnight).
The appliance must not be operated when the oven
cavity is still wet or damp.
Subsequent Cleaning
1.
Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2.
Clean the smooth surfaces in the oven cavity with a
dish cloth or a soft brush. Stubborn residues can be
removed using a soft scouring pad.
3.
Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
4.
Use the ON l OFF touch button to switch off the
appliance.
5.
Leave the appliance door ajar in the stop position
(approx. 30°) for approx. one hour to allow the enamel
surfaces in the oven cavity to dry thoroughly.
Alternatively, you can also run the Drying function for
the oven cavity.
Running the Drying Function for the Oven Cavity
1.
Touch the ON l OFF touch button.
2.
Touch the MENU touch button.
3.
Swipe to the left or right to select "Drying
ª
".
4.
Touch the bottom line.
5.
Touch the START l STOP touch button.
The appliance starts Drying. The remaining time
appears on the display.
As soon as the Drying function has run through, a signal
sounds and the appliance ends the operation
automatically.
Removing Heavy Food Deposits
You have several options for removing particularly
stubborn food deposits.
▯
Leave the vinegar solution to work for some time
before starting Easy Clean.
▯
Rub vinegar solution onto the food and food spills on
the smooth surfaces before starting Easy Clean.
▯
Repeat the Easy Clean function after the oven cavity
has cooled down.