Thermador PO302W Installation Instructions - Page 17
Cabinet Requirements - reviews
View all Thermador PO302W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Cabinet Requirements Cabinet materials must be able to withstand the high heat associated with the use of an oven. It is the owner's responsibility to review the suitability of cabinet materials prior to installation and use of the oven. Under oven dimensions are provided as a general guideline and may be adjusted as needed based on a particular application. Consult a design professional for optimizing personal preferences. Cabinet requirements vary depending on the model to be installed. Please consult the "Appliance and Cabinet Cutout Dimensions" chapter for the details pertaining to your particular model. All models require: ▯ ¼" (6.4 mm) space between the side of the oven and an adjacent wall or cabinet door when installed at the end of a cabinet run. ▯ A 2" diameter hole is required to run conduit to the junction box. ▯ The junction box must be installed according to the locations specified and can be found in the individual dimension installation instructions found. ▯ The cabinet base must be flat and capable of supporting the weight of your oven when in use (varies by model up to 429 lbs. (195 kg)). See the appropriate weight for your model in the NOTICES area at the beginning of each individual model section. ▯ Ensure that a recommended 1/4" (6 mm) minimum clearance gap is maintained on either side of the oven door with that of adjacent cabinetry, cabinet doors, walls, etc. to avoid incidental contact with the oven door throughout its entire range of motion. ▯ Ensure that the cabinet floor structure properly supports the full weight of the oven from underneath. It is recommended that (2) 2x4 runners spanning front to back of the cabinet be installed and be adequately supported within the cabinet. The runners should be spaced apart to the full width of the oven such that they support the left and right edges of the oven base. Note: When installing a side hinge oven, leave a minimum 10" (254 mm) clearance to allow the door to open. Door Handle Depth $ % & ' ó PP A Masterpiece Series Handle B Masterpiece Series Side Hinge Handle C Professional Series Handle D Professional Series Side Hinge Handle Note: Protrusion of handle from outer part of door. Does not include thickness of door. $ A Door Fully Open PP 17
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84