Thermador PRD364WLHU Product Spec Sheet - Page 6

PRD364WLHU 36-INCH DUAL-FUEL PRO HARMONY® RANGE WITH GRILL PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE Installation Clearances with Flush Island Trim 36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH "FLUSH ISLAND TRIM" 36" (914 mm) min. to combustible materials 6" (152 mm) min. to combustible surface with Flush Island Trim Combustible Materials Shaded area behind range indicates minimum clearance to combustible surfaces, combustible materials cannot be located within this area. 35 7/8" (911 mm)Min. 36 ¾" (933 mm) Max. 28" (711 mm) 27¼" (692 mm) 245/8" (625 mm) 24" (610 mm) max. recess depth For Flush Island Trim installations, counter surface should have a cantilever edge meeting the back section of the Flush Island Trim accessory. Cantilever 24¾" (629 mm) 22 5/8" (575 mm) 447/8" (1140 mm) Total Clearance As defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances of less than 6" (152 mm) must be approved by the local codes and/or by the local authority having jurisdiction. If an inner wall is used under the cantilever counter top, there should be a 1/8" (3 mm) gap from the rear of the range to the inner wall. These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty details, refer to your Use & Care manual, or ask your dealer. Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada. 1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2020 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED. Page 6 of 6 4 / 20