Thermador PRD606RCSG Product Specs - Page 4
Inch Range Dimensions And Clearance Requirements With Low Back
![]() |
View all Thermador PRD606RCSG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PRD606RCSG 60-INCH DUAL-FUEL PRO GRAND® RANGE WITH STEAM, GRILL AND GRIDDLE PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE Installation Clearances with Low Backguard 60-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH "LOW BACK" NOTE: A 36-inch minimum clearance is required between the top of the cooking surface and the bottom of an unprotected cabinet. A 30-inch clearance can be used when the bottom of the wood or metal cabinet is protected by not less than 1/4 inch of a flame retardant material covered with not less than No. 28 MSG sheet steel, 0.015 inch (0.4 mm) thick stainless steel, 0.024 inch (0.6 mm) aluminum, or 0.020 inch (0.5 mm) thick copper. 36" (914 mm) min. to combustible materials 31¼" (794 mm) 291/8" (740 mm) Combustible Materials 9" (229 mm) Lowback 357/8" (911 mm) Min. 36¾" (933 mm) Max. 251/8" (638 mm) max. recess depth Combustible Back Wall 267/8" (683 mm) 48¾" (1238 mm) As defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances of less than 12" (305 mm) must be approved by the local codes and/or by the local authority having jurisdiction. Page 4 of 5 01 / 16
![](/manual_guide/products/thermador-prd606rcsg-product-specs-4946b85/4.png)