Thermador PRG304WH Product Spec Sheet - Page 2

PRG304WH 30-INCH GAS PRO HARMONY® RANGE PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE ACCESSORIES (INCLUDED) 1 Telescopic Rack, 2 Standard Racks, 1 Lg. Broil Pan, Island Trim ACCESSORIES (OPTIONAL) PWOKRINGHC Wok Ring PAGRIDDLE Professional Griddle, Sits on Top of Grates Over 2 Star Burners, High-Release Coating PAKNOBLUWH Metallic Blue Knob Kit PAALTKITHW High Altitude Kit, Natural Gas Pro Harmony Ranges, 5,400 ft. to 10,200 ft. Contact Customer Support High Altitude Kit, Gas or Dual-Fuel Pro Harmony Ranges Connected to LP Gas, 10,000 ft. to 10,200 ft. PA12CHPBLK Chopping Block / Cutting Board PA30WLBH Pro Harmony 7" Low Backguard* PALPKITGW LP Conversion Kit, Pro Harmony Gas Models with 4 and 6 Burners *Models PCG305xx, PRD305xx, PRD606xx, PRG305xx, PRG304xx and PRD304xx are suitable for 0" rear clearance to combustible surfaces. All other models: when using the included Island Trim a minimum 6" (152 mm) rear clearance is required to a combustible surface. When installing against a combustible surface, a Thermador® Low Backguard is required for a 0" rear clearance to the combustible surface. A Thermador Low Backguard must be purchased separately. A rear clearance to a surface covered in a noncombustible material (metal, ceramic tile, brick, marble, or stone) is 0" when using the included Island Trim. Clearances of less than 6" (152 mm) should be approved by the local codes and/or by the local authority having jurisdiction. Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Page 2 of 6 2 / 19