Thermador PRG486GDH Design Guide - Pro Harmony Ranges - Page 8
Pro Harmony Ranges, Pro Harmony, Ranges - propane conversion
View all Thermador PRG486GDH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PRO hARMONY RANGES iNSTALLATiON OPTiONS Thermador Pro Harmony® Ranges feature a bold, professional design and a compact, 24-inch depth profile that creates a seamless look within standard cabinetry. These ranges can be installed in a wall or island installation. BAckGuARD The 30-inch Thermador Pro Harmony Range includes a 6-inch low backguard. An optional 22-inch high shelf backguard is also available. Either backguard must be attached before sliding the range into the final installed position. An island trim is available for covering the backguard mounting flanges for island installations, where there is a minimum of 12" of horizontal clearance behind the island trim. cAuTiON: To avoid possible burn or fire hazard, a backguard designed specifically for this range must be installed whenever the range is used. NATuRAL GAS OR LP Thermador Dual-Fuel Pro Harmony Ranges are shipped by the factory to operate on natural gas. They must be converted for use with propane. Verify that the type of gas being used at the installation site matches the type of gas used by the appliance. If the location/job site requires conversion from natural gas to propane (LP), order PALPKITHC. Field conversion must be done by qualified service personnel only. Please refer to the LP Conversion Instructions packed with product for further information. iMPORTANT We strongly recommend that a Thermador Professional Wall or Island Hood or Custom Insert be installed with all Thermador Pro Harmony Ranges. Downdraft ventilation should not be used. Do not install a microwave-hood combination above the cooktop, as these types of units do not provide the proper ventilation and are not suitable for use with Thermador Pro Harmony Ranges. Refer to the Ventilation section or www.Thermador.com for a complete selection of Professional ventilation options, blowers, and accessories. Due to the high surface temperature output of the Pro Harmony Ranges, the HPWB Professional Series Wall Hoods or the Professional Series Custom Inserts are recommended ventilation solutions for these ranges. The PH Professional Series Wall Hoods are also a viable option, however the 27" depth of the PH Series may not be suitable to all applications. PRO hARMONY® RANGES 30-iNch DuAL-FuEL Model: PRD304Ghu 30-INCH CuTOuT AND RANGE DIMENSIONS *min. 30"- 40" 30" 24" 513/16" **min.10" 187/16" 215/16" Gas and Electric connections * 30" minimum clearance above cooking surface to non-combustible surface. Minimum clearance above cooking surface to combustible surface is 40". ** 10" minimum clearance from cooking surface to combustible side walls. Note: Most hoods contain combustible components that must be considered when planning the installation. measurement in inches 2915/16" 271/4" 275/8" 243/4" 23" 447/8" measurement in inches 357/8"363/4" 1.800.735.4328 | THERMADOR.COM 47