Thermador T18ID800LP Installation Manual - Page 6
Installation options - model
View all Thermador T18ID800LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation options There are many different installation options. These are limited only by the design of the kitchen. See also "Kitchen Design Quick Reference". Individual appliance Individual appliances with partition Side-by-Side When dimensioning the partition for model 4, note the thickness of the door panels to prevent damage if the doors are opened at the same time. Use the Heater Kit for Side-by-Side Installation if the gap between the appliances is less than 6" (160 mm). See the section on "Required accessories and tools/Optional accessories". Minimum thickness of the partition 5/8" (16 mm). Individual appliance at the end of the kitchen If one side of the appliance is visible, a side panel must be used. The side panel must be connected firmly to the wall, the floor and overhead cabinet/fixtures before the appliance is placed in the installation enclosure. The dimensions of the side panel are taken from the opposite installation enclosure wall. During installation ensure that the installation enclosure is square and the proper size. 6