Thermador T36IB902SP Instructions for Use - Page 18
Resetting to the factory settings
View all Thermador T36IB902SP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
en-us Operating the appliance Switching on Pull-to-open system In an installation situation with handles you can select the Pull-to-open system. Your appliance will support you in opening the door as soon as you pull on the handle. 1. Open menu item Auto door opening of refrigerator compartment or freezer compartment. 2. Select menu item Pull-to-open system. 3. Press 8 button to open the menu item. 4. Select menu item Opening force. Here you can select the level of force required to activate automatic door opening. Switching off automatic door opening 1. Open menu item Auto door opening. 2. Select menu item Off. Switching the water filter counter on and off If you have replaced the water filter with a particle filter, switch the water filter counter off. It is not needed in this case as the particle filter does not have to be replaced. 1. Press " button to open the Settings menu. 2. Use ( button to move to the Appliance settings menu. 3. Press 8 button. 4. Press ) button to move to the menu item Water filter counter. 5. To change the setting, press : button. Switching on or switching off condensation protection This function is only available with 3-door appliances. 3-door appliances are equipped with a door pillar featuring condensation protection. You can open the left-hand door of the refrigerator compartment without opening the right-hand door beforehand. 9 CAUTION Never unfold the door pillar when the door is open!It can get jammed when closing the door and become damaged, or itself damage the front panel of the right-hand door. A heater is built into the door pillar to prevent condensation. Switching condensation protection on or off switches the heater on or off. ~ "Settings menu" on page 10 1. Press " button to open the Settings menu. 2. Use ( button to move to the menu item Appliance settings. 3. Press 8 button. 4. Press ) button to move to the menu item Prevent condensation. 5. To change the setting, press : button. Theater mode If Theater mode is switched on, the light will slowly become brighter when the appliance is opened, and then slowly darker when it is closed. Switching Theater mode on or off 1. Press " button to open the Settings menu. 2. Use ( button to move to the menu item Appliance settings. 3. Press 8 button to open the menu item. 4. Use ) button to move to the menu item Theater mode. 5. Press : button to open the menu item. 6. Use ) button to move to the menu item On or Off. 7. Press 8 button. The setting is saved. 8. Press ; button to exit the menu. Resetting to the factory settings 1. Press " button to open the Settings menu. 2. Use ( button to move to the menu item Appliance settings. 3. Press 8 button. 4. Use ( button to move to the menu item Factory settings. 5. Press : button. A signal tone sounds, and a prompt to confirm reset appears. 6. Press 8 button. All settings are reset to the factory settings. 7. Press ; button to exit the menu. Switching demo mode on or off The cooling function of the appliance is switched off. All other functions can be used. Note: Do not store any food items in demo mode as the appliance remains at room temperature. 1. Press " button to open the Settings menu. 2. Use ( button to move to the menu item Appliance settings. 3. Press 8 button. 4. Use ( button to move to the menu item Demo mode. 5. Press : button. 6. Use ( ) buttons to select the setting On or Off 7. Press 8 button. The setting is saved. 8. Press ; button to exit the menu. 18
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84