Thermador VCI248DS Installation Instructions - Page 5
Important Information - instructions
View all Thermador VCI248DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
IMPORTANT INFORMATION: ṇ Old appliances are not worthless junk. Valuable raw materials can be reclaimed by recycling old appliances. Before disposing of your old appliance, render it unusable. ṇ You received your new appliance in a protective shipping carton. All packaging materials are environmentally friendly and recyclable. Please contribute to a better environment by disposing of packaging materials in an environmentally-friendly manner. ṇ The hood can only be used in exhaust air mode. ṇ Always mount the hood over the center of the cook- top. ṇ Minimum distance between electric cooktop and bottom edge of hood: 30" mm, Fig. 1. ṇThe extractor hood must not be installed over a solid fuel cooker - a potential fire hazard (e.g. flying sparks) - unless the cooker features a closed, non-removable cover and all national regulations are observed. ṇ The smaller the gap between the hood and burners, the greater the likelihood that droplets will form on the underside of the hood. Fig. 1 GAS Additional gas cooktop information: ṇ When installing gas cooktops, comply with the relevant national statutory regulations. ṇ Always comply with the currently valid regulations and installation instructions supplied by the gas appliance manufacturer. ṇ Only one side of the hood may be installed next to a high-sided unit or high wall. Leave a gap of at least 2". ṇ Minimum distance between the upper edge of the gas burner grates and lower edge of the hood: 30", Fig. 1. ELECTRIC min. 30" min. 30" PAGE 3